Useful capacity from day one
5,120Wh is built into the main unit, so expansion is optional rather than required.
The PECRON F5000LFP is a portable power station with a 5,120Wh LiFePO4 battery, 120V/240V AC output, high-rate AC and solar charging, and support for up to six FP5000-48V expansion batteries. It is suited to backup-power setups and off-grid use where substantial storage and dual-voltage output are important.
At 240V, the unit provides up to 7,200W through its AC output. Its listed 120V AC output groups are rated up to 3,600W, giving the system flexibility for equipment designed for either household voltage.
The system also supports 120V charging while providing 240V output, helping it remain useful in a wider range of backup configurations.
The built-in battery provides 5,120Wh of storage before expansion. For longer backup coverage or greater off-grid energy storage, the system can be paired with up to six compatible FP5000-48V batteries, bringing total capacity to as much as 35,840Wh.
5,120Wh is built into the main unit, so expansion is optional rather than required.
Compatible FP5000-48V batteries increase total storage to as much as 35.8kWh.
PECRON rates the battery to retain more than 80% capacity after 4,000 cycles under its stated test conditions.
Add storage later as outage coverage, runtime targets or off-grid energy use increases.
Using the specified 30A AC setup, the unit accepts up to 3,600W and PECRON lists a full charge time of about 1.8 hours. With a 15A cable, the listed AC input is 1,800W. Charging time can vary with conditions, connected loads, and the available input power.
Two XT60-M solar inputs support up to 6,400W total, or up to 3,200W per input. Each input is rated for 30V to 180V open-circuit voltage and up to 25A, so solar arrays must remain within the specified voltage and current limits.
Selected online UPS outputs provide 0ms transfer, while backup UPS outputs are rated at 8–20ms.
Monitor operating status, customize charging plans, review event logs and manage automated actions.
Charge-only and keep-warm modes support cold-weather charging planning down to -4°F (-20°C) with heating activated.
Adjustable 12–40V DC output is joined by two 100W USB-C ports and two 18W USB-A ports.
| Specifications | |
| Model SKU | F5000LFP |
|---|---|
| Weight | About 123.9 lb / 56.2 kg |
| Dimensions | L21.7 × W15 × H13.1 in |
| Charge Temperature | -20°C to 45°C / -4°F to 113°F |
| Battery Heating | Battery heating activation supported |
| Discharge Temperature | -10°C to 45°C / 14°F to 113°F |
| Warranty | 3+2 Years |
| Capacity | 5120Wh |
| Cell Chemistry | LiFePO4 |
| Storage Ambient Temperature | 0°C to 45°C / 32°F to 113°F |
| Optimal Storage Range | 20°C to 30°C / 68°F to 86°F |
| Cycle Life | 4000 cycles to 80%+ capacity |
| 120V AC Output | NEMA 5-20P ×2, 3600W Max |
| 120V TT-30R Output | 3600W Max |
| Additional 120V AC Output | NEMA 5-20P ×2, 3600W Max |
| Online UPS Output | 0ms |
| 240V AC Output | 7200W Max |
| DC XT60 Output / 5525 | 12V to 40V DC, 25A Max, 800W Max |
| USB-C Output | 2 ports, 5V / 9V / 12V / 20V, 100W Max |
| USB-A Output | 2 ports, 5V / 9V / 12V, 18W Max |
| AC Input | 3600W Max with 30A cable / 1800W with 15A cable |
| Solar Input | XT60-M, 6400W Max / 2 × 3200W Max |
| Solar Input Voltage | Voc 30V to 180V |
| Solar Input Current | 25A Max |
| Single Unit Input | 5800W Max |
| Input With Extra Battery | 6400W Max |
| UPS Power | 3600W Max, 0ms UPS |
| Extra Battery Support | Up to 6 FP5000-48V batteries |
| Expandable Capacity | Up to 35,840Wh |
| AC Charging Time | 3600W 30A AC cable, full charge in 1.8 hours |
| Solar Charging Time | 5800W Max solar input, full charge in 1.2 hours |
| Note | Not recommended for long-term use with EP3800-48V / EP3000-48V |
| Protection Note | May trigger overheating protection and disconnect from the main unit |
| Backup UPS Output | 8–20ms |
Clear answers to common questions about this product, setup, compatibility, and use.