Useful capacity from day one
5,120Wh is built into the main unit, so expansion is optional rather than required.
The F5000LFP combines a 5,120Wh LiFePO4 battery, dual-voltage AC output, high-rate charging and expandable storage in one wheeled power station. It is built for home backup planning, cabins, workshops, RV support and off-grid systems where both capacity and high-output loads matter.
At 200–240V, the F5000LFP is rated for up to 7,200W. Its 100–120V output is arranged as two 3,600W groups, giving you a practical way to plan around both conventional outlets and compatible higher-voltage equipment from the same power station.
The system also supports 120V charging while providing 240V output, helping it remain useful in a wider range of backup configurations.
The built-in 5,120Wh battery provides substantial storage before any expansion is added. For longer outages or larger off-grid energy needs, the F5000LFP can connect with up to six compatible PECRON FP5000-48V expansion batteries, bringing total system capacity to 35,840Wh.
5,120Wh is built into the main unit, so expansion is optional rather than required.
Compatible FP5000-48V batteries increase total storage to as much as 35.8kWh.
PECRON rates the battery to retain more than 80% capacity after 4,000 cycles under its stated test conditions.
Add storage later as outage coverage, runtime targets or off-grid energy use increases.
Using the 30A AC input, PECRON rates the F5000LFP for 3,600W AC charging and a 1.8-hour full recharge. A standard 15A AC charging option is also supported at up to 1,800W.
Two independent XT60 solar inputs each accept 30–180V DC, up to 25A and 3,200W. The standalone power station supports up to 5,800W combined solar input; connecting a compatible expansion battery raises the system maximum to 6,400W. PECRON lists a 1.2-hour full recharge at the 5,800W solar-input maximum.
Selected online UPS outputs provide 0ms transfer, while backup UPS outputs are rated at 8–20ms.
Monitor operating status, customize charging plans, review event logs and manage automated actions.
Charge-only and keep-warm modes support cold-weather charging planning down to -4°F (-20°C) with heating activated.
Adjustable 12–40V DC output is joined by two 100W USB-C ports and two 18W USB-A ports.
| Specifications | |
| Model SKU | F5000LFP |
|---|---|
| Weight | About 123.9 lb / 56.2 kg |
| Dimensions | L21.7 × W15 × H13.1 in |
| Charge Temperature | -20°C to 45°C / -4°F to 113°F |
| Battery Heating | Battery heating activation supported |
| Discharge Temperature | -10°C to 45°C / 14°F to 113°F |
| Warranty | 3+2 Years |
| Capacity | 5120Wh |
| Cell Chemistry | LiFePO4 |
| Storage Ambient Temperature | 0°C to 45°C / 32°F to 113°F |
| Optimal Storage Range | 20°C to 30°C / 68°F to 86°F |
| Cycle Life | 4000 cycles to 80%+ capacity |
| 120V AC Output | NEMA 5-20P ×2, 3600W Max |
| 120V TT-30R Output | 3600W Max |
| Additional 120V AC Output | NEMA 5-20P ×2, 3600W Max |
| UPS Output | 0ms |
| 240V AC Output | 7200W Max |
| DC XT60 Output / 5525 | 12V to 40V DC, 25A Max, 800W Max |
| USB-C Output | 2 ports, 5V / 9V / 12V / 20V, 100W Max |
| USB-A Output | 2 ports, 5V / 9V / 12V, 18W Max |
| AC Input | 3600W Max with 30A cable / 1800W with 15A cable |
| Solar Input | XT60-M, 6400W Max / 2 × 3200W Max |
| Solar Input Voltage | Voc 30V to 180V |
| Solar Input Current | 25A Max |
| Single Unit Input | 5800W Max |
| Input With Extra Battery | 6400W Max |
| UPS Power | 3600W Max, 0ms UPS |
| Extra Battery Support | Up to 6 FP5000-48V batteries |
| Expandable Capacity | Up to 35,840Wh |
| AC Charging Time | 3600W 30A AC cable, full charge in 1.8 hours |
| Solar Charging Time | 5800W Max solar input, full charge in 1.2 hours |
| Note | Not recommended for long-term use with EP3800-48V / EP3000-48V |
| Protection Note | May trigger overheating protection and disconnect from the main unit |