1 / 5
Rich Solar 2 Pole Outdoor Circuit Breaker Box | Outdoor Circuit Breaker Box with 2 Poles and Solar Isolator Disconnect Switch | Choose Amp: 30A, 40A, 60A, 80A, 120A - 30A
Frequently Bought Together
Rich Solar RS-CB2P30 2 Pole Outdoor Circuit Breaker Box
The Rich Solar RS-CB2P30 2 Pole Outdoor Circuit Breaker Box gives solar, RV, off-grid, and PV array systems a dedicated breaker and isolator disconnect option. Available in 30A, 40A, 60A, 80A, and 120A ratings, this 2-pole breaker box is designed for compatible photovoltaic solar panel systems, grid-connected solar setups, off-grid solar power systems, PV arrays, and RV solar installations that need a properly sized disconnect point.
Product Overview
The RS-CB2P30 breaker box is built for customers who need a clean disconnect and breaker solution for solar power systems. It can be used in compatible photovoltaic solar panel grid-connected systems, off-grid solar systems, PV array wiring, and RV solar installations.
Instead of leaving system protection and isolation as an afterthought, this breaker box gives installers and DIY solar builders a dedicated enclosure with a 2-pole breaker configuration and multiple current rating options to better match the system design.
Choose the Right Amp Rating
This breaker box is available in several current ratings so customers can select the version that fits their specific solar or DC power system. The right choice depends on array current, equipment limits, wire sizing, system voltage, and the protection requirements of the installation.
Built for Solar, PV Array, and RV Power Systems
This breaker box is suitable for photovoltaic solar panel grid-connected systems, solar off-grid power generation systems, PV arrays, and RV solar applications. It is useful anywhere a compatible solar or DC system needs a breaker and disconnect point between major components.
Key Features That Matter
This description keeps the focus on the actual buying decision: amp rating options, 2-pole configuration, voltage range, breaking capacity, lifecycle ratings, solar system suitability, and proper installation planning.
The 2P configuration gives compatible solar and DC system layouts a two-pole breaker and disconnect option. This is useful for PV array wiring, RV solar systems, and off-grid solar power generation setups.
Choose from 30A, 40A, 60A, 80A, or 120A rated current options to match the system’s electrical requirements. This helps customers select the right breaker box for different solar array and equipment sizes.
The listed rated voltage range is AC90–400V and DC12–400V, making proper system matching important for both AC and DC use cases. Always confirm voltage compatibility before installing.
The product page lists endurance of at least 4000, electrical life of not less than 4000 operations, and mechanical life of no less than 10000 operations for compatible installations.
Important Electrical Specs
- Number of poles: 2P
- Rated current options: 30A, 40A, 60A, 80A, 120A
- Breaking capacity: 4000A
- Rated voltage: AC90–400V; DC12–400V
- Rated frequency: 50/60Hz
- Endurance: ≥ 4000
- Protection level: IP20
- Electrical life: not less than 4000 operations
- Mechanical life: no less than 10000 operations
- Circumstance temperature: 23°F to +104°F
Where It Fits in a Solar System
A breaker box like this is typically used as part of a larger protection and disconnect strategy. Depending on the system, it may be placed in PV array wiring, solar-to-controller wiring, inverter system layouts, or other DC/AC disconnect points where the electrical design calls for it.
The exact placement depends on the solar panel configuration, controller or inverter limits, battery system, code requirements, and how the system is being installed.
Best Uses
- PV array disconnect and breaker applications
- Photovoltaic solar panel grid-connected systems
- Solar off-grid power generation systems
- RV solar installations
- Cabin, shed, and remote solar power systems
- Solar panel wiring protection layouts
- Battery-based solar system protection planning
- Installations that need 30A, 40A, 60A, 80A, or 120A breaker options
- Solar projects requiring a 2-pole breaker/disconnect enclosure
Key Benefits
- 2 pole outdoor circuit breaker box
- Solar isolator disconnect switch design
- Choose from 30A, 40A, 60A, 80A, or 120A rated current
- 4000A breaking capacity
- Rated voltage: AC90–400V and DC12–400V
- Rated frequency: 50/60Hz
- Endurance listed at ≥ 4000
- Electrical life listed at not less than 4000 operations
- Mechanical life listed at no less than 10000 operations
- Operating circumstance temperature listed from 23°F to +104°F
- Suitable for photovoltaic solar panel grid-connected systems
- Suitable for solar off-grid power generation systems
- Useful for PV array and RV solar applications
| Specifications | |
| Model SKU | RS-CB2P30 |
|---|---|
| Number of Poles | 2 |
| Rated Current | 30, 40, 60, 80, 120A |
| Breaking Capacity | 4000A |
| Rated Voltage | AC90-400V; DC12-400V |
| Rated Voltage | 50, 60 Hz |
| Endurance | ≥4000 operations at 30/40/60A, ≥2000 operations at 80/120A |
| Circumstance Temperature | 23°F ~ + 104°F |
| Protection Level | IP65 exterior & IP20 interior |
| Electrical Life | ≥4000 operations |
| Mechanical Life | ≥10000 operations |
