48V 100Ah (5.12kWh) V2-T Elite Series - Heated & Bluetooth & Victron Comms LiFePO4 Battery 48V 100Ah (5.12kWh) V2-T Elite Series - Heated & Bluetooth & Victron Comms LiFePO4 Battery
SKU: C48100A-A
- Warranty 11-year manufacturer warranty
- Nominal capacity 100Ah
- Charge profile CC/CV LiFePO4 charging; no equalization
The 48V 100Ah (5.12kWh) V2-T Elite Series - Heated & Bluetooth & Victron Comms LiFePO4 Battery helps complete a more capable solar and off-grid power and backup energy storage setup with monitoring, charging, control, or DC distribution support. It is intended for builders who want cleaner system integration instead of guessing through mismatched components.
Use it when upgrading an RV, marine, van, solar, or off-grid power system that needs better visibility, safer distribution, or smarter charging control. Always confirm model compatibility, voltage range, current rating, communication requirements, and installation clearances before ordering.
- Product role: Victron System Component
- Best-use applications: solar and off-grid power and backup energy storage
- Notable features: Bluetooth monitoring support, built-in heating for cold-weather charging support, Victron-compatible system communication, and solar and off-grid system integration
- SKU: C48100A-A
For a cleaner install, compare this component against your battery voltage, charging source, inverter needs, monitoring goals, and communication requirements before finalizing your system design.
Compare before you choose
Compare nominal voltage, stored energy, BMS current, temperature protection and communication before sizing a bank.
See the 48V 100Ah (5.12kWh) V2 Elite Series - Heated & Bluetooth & Victron Comms LiFePO4 Battery for another Epoch Batteries battery option.
| 48V 100Ah (5.12kWh) V2-T Elite Series - Heated & Bluetooth & Victron Comms LiFePO4 Battery | |
| Selected variant SKU | C48100A-A |
|---|---|
| MODEL | |
| Model / SKU | C48100A-A |
| 48V 100Ah Elite This model | 100Ah |
| Product Type | Battery |
| ELECTRICAL | |
| Series | V2-T Elite Series |
| Battery type | Heated Bluetooth LiFePO4 battery with Victron communication and integrated Class-T fuse |
| Chemistry | LiFePO4 / Lithium iron phosphate |
| Cell configuration | 16S1P |
| Integrated fuse | 250A Eaton Class-T fuse, user-serviceable |
| Nominal voltage | 51.2V |
| Nominal capacity | 100Ah |
| Stored energy | 5.12kWh / 5,120Wh |
| Maximum voltage | 58.0V |
| Minimum voltage | 41.6V |
| Charge profile | CC/CV LiFePO4 charging; no equalization |
| Max continuous discharge | 150A |
| Peak discharge | 300A for 30 seconds |
| Max continuous charge current | 100A |
| Peak charge current | 300A for 10 seconds |
| Approx. continuous DC output | Up to 7,680W nominal before inverter losses |
| Internal fuse rating | 250A Class-T fuse |
| Series connections | Not supported |
| Parallel connections | Up to 16 batteries in parallel |
| Maximum bank capacity | Up to 1,600Ah / 81.92kWh at 48V nominal with 16 matched batteries |
| Series-parallel configuration | Not supported |
| Battery group / footprint | Group 8D-style footprint |
| Non-Victron absorption voltage | 56.8V |
| Float voltage | 54.0V |
| Battery Features | Bluetooth monitoring, Self-heating, LiFePO4 chemistry |
| CONNECTIONS | |
| Bluetooth | Yes — Epoch app support for iOS and Android |
| Victron communication | CANBus / Victron-ready communication with DVCC support |
| Self-heated charging support | Down to -22°F / -30°C when external charge current is available |
| Terminal type | M8 bolts |
| Terminal torque | 12 N·m / 8.85 lb-ft; follow the product label and manual |
| PHYSICAL | |
| Length | 20.86 in / 529.8 mm |
| Weight | 97 lb / 44 kg |
| Case material | PC + ABS, UL94 V-0 |
| OPERATING LIMITS | |
| Cycle life | 3,500+ cycles |
| Standard charge temperature range | 32°F to 131°F / 0°C to 55°C |
| Discharge temperature range | -4°F to 131°F / -20°C to 55°C |
| Storage temperature, up to 1 month | -4°F to 113°F / -20°C to 45°C |
| Storage temperature, up to 1 year | 32°F to 95°F / 0°C to 35°C |
| Ingress protection | IP67 dust-tight and waterproof for temporary immersion |
| Temperature compensation | Disabled / 0mV per °C |
| BMS protections | Overcharge, over-discharge, over-current, short-circuit, high-temperature, and low-temperature protection |
| Fuse certification | UL60691 certified internal fuse listed on product page |
| Cell certifications | UL1642, UL9540A, IEC 62619:2022 certified cells |
| Pack certification | UL1973 certified pack listed on product page |
| Warranty | 11-year manufacturer warranty |
| Absorption time | Minimum 15 minutes per battery |
| Victron setup | Connect to a compatible GX device, enable DVCC, set Epoch as controlling BMS and battery monitor, and use 500 kbit/s CAN settings where required |
| Energy Capacity | 5.12 kWh |
| Max Charge Rate | 100A |
| Massive 5.12kWh 48V Powerhouse | Premium LiFePO4 chemistry delivering immense energy storage (100Ah) and heavy-duty output (150A continuous / 300A peak). It provides the heavy, sustained power required to confidently run high-draw 48V off-grid, marine, and solar inverter systems. |
| Exclusive V2-T Safety (Serviceable Class T Fuse) | Take your system safety to the next level. Uniquely equipped with a built-in, user-serviceable 250A EATON Class T fuse for maximum short-circuit/arc-flash protection—saving you the hassle, space, and expense of wiring external high-speed inverter fuses. |
| Your Whole System in Your Pocket (Bluetooth) | Eliminate the guesswork. Monitor real-time state of charge, cell voltage, and system health via the free Epoch iOS/Android apps. Plus, take physical control of your setup with the included mountable external power button and detailed battery gauge. |
| Extreme Weather Ready (Heated & IP67 Rated) | Uncompromising performance in any climate. The battery is completely sealed against dust and water immersion (IP67), while automatic internal heating ensures safe charging even in freezing, sub-zero conditions (below 0°C). |
| Unmatched Safety & UL Certifications | Built to the absolute highest industry standards (UL1973 pack, UL1642/UL9540A/IEC 62619 cells, UL60691 internal fuse). The intelligent Smart BMS automatically safeguards your investment against over-charge, over-discharge, short circuits, and extreme temperatures. |
| Massive Scalability & 11-Year Warranty | Safely connect up to 16 batteries in parallel to build an immense 81.92 kWh off-grid power bank as your energy needs grow. Enjoy a completely maintenance-free solution boasting a 3,500+ cycle life, proudly backed by our industry-leading 11-Year Manufacturer Warranty. |
| Charge profile CC/CV (no equalization) Constant Current | ≤0.5C, Constant Voltage: 3.60V, Cut off: ≥0.02C |
| Short circuit protection current Fuse | 400A Fuse: 270A Fuse: 270A |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


