1 / 10
Rich Solar Inverter Remote Control with Smart LCD Display — Exclusive for Nova Pure Series
Frequently Bought Together
Inverter Remote Control with Smart LCD Display — Exclusive for Nova Pure Series
The RS-RM01 Inverter Remote Control gives Nova Pure Series inverter owners a dedicated remote monitoring and control panel — purpose-built and exclusive to the RS-V3P12, RS-V3P24, RS-V2P12, RS-V2P24, and RS-V1P12 models. The backlit smart LCD displays real-time voltage, output power, battery level, and load status, with symbol-based fault alerts for fast diagnostics. A 6-meter shielded RJ45 cable delivers stable, interference-free communication, and raised bubble buttons give tactile, reliable control from a flush-mounted panel wherever you need it.
Four-Point Real-Time Monitoring
The smart LCD tracks voltage, output power, battery level, and load status simultaneously — a more complete real-time picture of your inverter's operating state than a single-metric display, all visible from one backlit screen.
Stable, Interference-Free Wired Control
A 6-meter shielded cable with RJ45 connector delivers a fully wired connection between the remote panel and inverter — no wireless dropouts, pairing issues, or signal interference from other electronics in an RV, van, or marine electrical system.
Tactile Bubble Buttons, Durable Build
Raised bubble buttons provide physical tactile feedback for confident control without looking at the panel, while scratch-resistant construction holds up to years of regular use in mobile and stationary installations alike.
Product Overview
The Rich Solar RS-RM01 is a dedicated remote monitoring and control panel built exclusively for the Nova Pure Series inverter lineup — compatible specifically with the RS-V3P12, RS-V3P24, RS-V2P12, RS-V2P24, and RS-V1P12 models. It extends inverter visibility and control to a convenient mounted location away from the inverter unit itself, which is often installed in a less accessible spot like a basement compartment, rear storage bay, or utility closet.
The smart LCD display covers four key data points in real time: voltage, output power, battery level, and load status — giving a more complete operational snapshot than monitoring voltage alone. When something goes wrong, the display shows symbol-based fault alerts rather than requiring you to cross-reference a numeric fault code against a manual, making day-to-day diagnostics faster for most common fault conditions.
Connection is fully wired: a 6-meter (19.69 ft) shielded cable terminating in an RJ45 connector runs from the inverter to the remote panel. The shielding protects against electromagnetic interference from nearby electronics, inverters, and motors — a real consideration in RV and marine electrical systems where multiple devices share tight wiring runs. At 93.5 × 56.5 × 18.5mm, the panel mounts flush using a 76.5mm hole-spacing pattern with 6.5mm mounting holes, fitting cleanly into a dash, control panel, or wall location near where you'll want to check on the system regularly.
See Everything That Matters, All in One Place
- Real-Time Voltage Monitoring: Track input and output voltage continuously, helping you catch abnormal readings before they become a larger system issue.
- Output Power Display: See exactly how much power the inverter is delivering at any given moment — useful for managing load against the inverter's rated capacity.
- Battery Level Tracking: Monitor battery state directly from the remote panel without a separate battery monitor — convenient for at-a-glance system health checks.
- Load Status Indication: View current load draw to understand how close your connected devices are pulling the inverter toward its limits.
- Symbol-Based Fault Alerts: When an issue occurs, the LCD displays an intuitive symbol rather than a numeric code alone — faster recognition for common fault types without needing to look up a reference table every time.
A Wired Connection You Can Trust
- 6m (19.69 ft) Shielded Cable: Generous cable length supports mounting the remote panel a meaningful distance from the inverter — from a rear storage bay to a front dash, or from a basement compartment to a living area wall.
- RJ45 Connector: Standard, widely available connector format for secure, reliable termination at both ends of the cable run.
- Shielded Against Interference: The cable's shielding blocks electromagnetic interference from nearby inverters, motors, and electronics — important in RV, van, and marine electrical systems where multiple high-current devices share close wiring runs.
- No Wireless Dropouts: Unlike Bluetooth or WiFi-based monitoring solutions, a fully wired connection means no pairing issues, no signal range limitations, and no risk of dropped connections during critical monitoring moments.
- Consistent Performance: The wired design delivers the same reliable connection whether you're parked in a remote location with no cell signal or docked in a marina surrounded by other vessels' electronics.
Built for Daily Use, Engineered to Last
- Raised Bubble Buttons: Physical, tactile button design provides confident feedback when pressed — easier to operate by touch alone, without needing to look directly at the panel, including while driving or in low-light conditions.
- Backlit LCD for Low-Light Visibility: The display backlight ensures the screen remains readable at night, in dim cabin lighting, or in enclosed compartments without external light sources.
- Scratch-Resistant Construction: Housing materials are built to resist the wear that comes from years of regular handling, cleaning, and exposure in active RV, van, and marine environments.
- Intuitive Interface: Clear iconography and straightforward menu navigation reduce the learning curve for new inverter owners who want quick access to system status without reading a lengthy manual.
- Flush Mount Design: Installs cleanly into a dash, wall, or control panel for an integrated, professional-looking finish rather than a surface-mounted accessory.
Straightforward Flush-Mount Installation
- Compact 93.5 × 56.5 × 18.5mm Footprint: Small enough to mount in a dash panel, control board, or wall location without requiring a large cutout or dominating the surrounding space.
- 76.5mm Hole-Spacing Pattern: Two 6.5mm mounting holes at a fixed spacing provide a secure, stable flush mount — straightforward to drill and install with basic tools.
- RJ45 Wired Connection: Run the included 6m shielded cable from the inverter's remote port to the panel location — no additional electrical wiring or terminal connections required beyond the single cable run.
- Refer to Inverter Manual for Setup: Detailed installation and configuration steps are covered in your specific Nova Pure Series inverter's user manual, ensuring the remote is configured correctly for your exact model.
- No Additional Power Source Needed: The remote panel draws power through the same RJ45 cable connection — no separate battery or power adapter required.
Full Specifications
| SKU | RS-RM01 |
| Display | Backlit LCD |
| Monitoring | Voltage, Output Power, Battery, Load |
| Fault Alerts | Symbol-Based |
| Buttons | Raised Bubble, Tactile Feedback |
| Overall Dimensions | 93.5 × 56.5 × 18.5 mm (3.68 × 2.22 × 0.73 in) |
| Mounting | Flush Mount |
| Hole Spacing | 76.5 mm (3.01 in) |
| Hole Diameter | 6.5 mm (0.26 in) |
| Connection | Wired RJ45, 6 m (19.69 ft) Shielded Cable |
| Compatibility | RS-V3P12, RS-V3P24, RS-V2P12, RS-V2P24, RS-V1P12 |
Best Uses
- Nova Pure Series inverter remote monitoring and control
- RV dash or wall-mounted inverter status panels
- Van build control panel integration
- Marine helm station inverter monitoring
- Off-grid cabin and stationary inverter installs
- Installations where electromagnetic interference is a concern
- Setups requiring a longer cable run between inverter and panel
Key Benefits
- Monitors voltage, output power, battery, and load simultaneously
- Symbol-based fault alerts for faster diagnostics
- 6m shielded RJ45 cable — interference-free wired connection
- Raised tactile bubble buttons for confident touch control
- Backlit LCD readable in low-light conditions
- Compact flush mount with simple two-hole installation
- Powered through the RJ45 cable — no separate power source needed
| Specifications | |
| Model SKU | RS-RM01 |
|---|---|
| Compatibility | RS-V3P12, RS-V3P24, RS-V2P24, RS-V2P12, RS-V1P12 inverters |
| Display | Backlit LCD |
| Overall Dimensions (L × W × H) | 93.5 × 56.5 × 18.5 mm / 3.68 × 2.22 × 0.73 in |
| Mounting | Flush mount, 76.5 mm (3.01 in) hole spacing, 6.5 mm (0.26 in) hole diameter |
| Connection | Wired RJ45 (6 m / 19.69 ft cable) |
| *Please refer to the inverter user manual for detailed installation and setup instructions. | |
