Jackery Explorer 2000 V2 Portable Power Station - 2042Wh Capacity | 2200W Jackery Explorer 2000 V2 Portable Power Station - 2042Wh Capacity | 2200W
SKU: 21-0001-000266
- Charge Temperature 32~113 °F (0~45°C)
- Discharge Temperature 14~113°F (-10~45°C)
- Capacity 45.6Ah/44.8V DC (2042 Wh)
Jackery Portable Power Station
Jackery Explorer 2000 V2 Portable Power Station - 2042Wh Capacity · 2200W
The Explorer 2000 v2 combines a 2,042Wh LiFePO4 battery with 2,200W continuous 120V AC output and 4,400W surge capability. It gives plug-in home essentials, RV equipment, and worksite devices more stored energy than Jackery’s 1kWh-class stations without requiring permanent installation.
The facts that matter
- The 2,042Wh capacity sets the energy budget; the 2,200W rating limits total continuous AC draw across its three outlets.
- Jackery rates short startup surges up to 4,400W. A device’s running and startup demands both matter when sizing a backup setup.
- Two DC8020 solar inputs accept 16–60V and up to 400W combined under the product’s listed limits.
- At about 39.5 lb, this LiFePO4 station is movable but should be planned as a substantial piece of portable equipment.
Where this model fits
Use it for 120V plug-in backup or mobile power when the load schedule calls for more energy than a 1kWh station. Refrigerators, routers, lights, and similar essentials still need their actual running draw and startup surge checked rather than assumed from appliance type.
Check before you buy
This is a 120V station, not a direct 240V supply. Verify the combined AC load, solar array voltage and 400W input limit, and whether the included AC charging cable covers your charging plan. The standalone package contains one station and one AC cable.
Compare the right Jackery size
Choosing by wattage alone can miss the battery size, outlet and solar-input differences. Compare these nearby models against your actual loads:
Plan your power needs
Use our backup power sizing guide to estimate capacity and output for your loads. The solar generator charging guide explains why a solar charge estimate depends on more than panel wattage.
Using this station for refrigerator backup?
Read our Explorer 2000 v2 refrigerator-runtime example for the capacity calculation, why compressor startup matters, and how to use your refrigerator’s measured daily energy instead of a generic wattage guess.
Plan and compare your power setup
Estimate your appliance energy and backup time in our Power Planner. Then compare available power stations and packages by published capacity, output and charging specifications. Check the exact model’s input, output, connector and expansion limits before buying.
| Jackery Explorer 2000 V2 Portable Power Station - 2042Wh Capacity / 2200W | |
| Selected variant SKU | 21-0001-000266 |
|---|---|
| MODEL | |
| Product Model | JE-2000D |
| Model / SKU | 21-0001-000266 |
| Product Type | Portable Power Station |
| ELECTRICAL | |
| Battery Capacity | 2042 Wh |
| Battery Chemistry | LiFePO4 |
| AC Output Waveform | Pure sine wave |
| AC Output | 120 V, 18.3 A, 60 Hz; 2,200 W maximum per outlet and 2,200 W total across three outlets |
| Surge Output | 4,400 W |
| USB-A Output | 18 W maximum; one port |
| USB-C Outputs | One 100 W maximum port and one 30 W maximum port |
| AC Charging Input | 100–120 V AC, 60 Hz, 15 A maximum; 1,800 W ±50 W maximum input |
| Solar Input | 16–60 V; 12 A and 200 W maximum with one port, or 21 A and 400 W maximum with two ports |
| Vehicle Charging Input | 11–16 V DC, 8 A maximum |
| AC Recharge Time | Approximately 2 hours |
| Vehicle Recharge Time | Approximately 24 hours; approximately 5.6 hours with a compatible car fast charger |
| Solar Recharge Time | Approximately 29 h with one 100 W panel, 15 h with two 100 W panels, 7.5 h with four 100 W panels, 6 h with six 100 W panels, 15 h with one 200 W panel, 7.5 h with two 200 W panels, 11 h with one 500X panel, or 5.5 h with two 500X panels |
| Standby Power Consumption | 18 W |
| UPS Transfer Time | Within 20 ms |
| CONNECTIONS | |
| DC Input Ports | Two DC8020 ports connected in parallel |
| PHYSICAL | |
| Dimensions | 13.2 × 10.4 × 11.5 in (33.5 × 26.4 × 29.2 cm) |
| Weight | Approximately 39.5 lb (17.9 kg) |
| Housing Material | High-strength PC and ABS plastic |
| OPERATING LIMITS | |
| Cycle Life | 4,000 cycles to at least 70% capacity |
| Charge Temperature Range | 32°F to 113°F (0°C to 45°C) |
| Discharge Temperature Range | 14°F to 113°F (-10°C to 45°C) |
| PACKAGE | |
| Included Components | 1 × Explorer 2000 v2, 1 × AC Charging Cable |
| Charge Temperature | 32~113 °F (0~45°C) |
| Discharge Temperature | 14~113°F (-10~45°C) |
| AC Total Output | 2200W Rated, 4400W Surge peak |
| Car Port | 12V⎓10A Max |
| DC Input | (2x) 2 x DC 8mm Ports: 11-16V⎓8A Max, Double to 8A Max;16-60V⎓12A, Double to 21A/400W Max |
| Storage temperature of heating module | -22℉~185℉ (-30°C~85°C) |
| Operating temperature of heating module | -4℉~113℉ (-20°C~45°C) |
| Heating module output | 20V ⎓ 1.5A |
| Operating Temperature Range | -4~149℉ (-20°C~65°C) |
| USB-A Output 5V⎓2.4A | USB-C Output 5V⎓3A |
| Maximum System Voltage | 80V |
| Maximum Reverse Current | 15A |
| Voltage Temperature Coefficient | -0.25%/°C |
| Power Temperature Coefficient | -0.22%/°C |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


