1 / 6
Rich Solar MEGA 200 PRO FLEX | 200W 24V Flexible Solar Panel | 360° Bendable, IP68 Waterproof, for RV Roofs, Marine, Off-Grid, and Overland Systems
Frequently Bought Together
Rich Solar MEGA 200 PRO FLEX — 200 Watt 24V Flexible Solar Panel
The MEGA 200 PRO FLEX is a 200-watt, 24-volt flexible solar panel built for installations where rigid glass panels simply won't fit. At just 0.1 inches thick and 8.6 lbs, it bends 360° to conform to curved RV roofs, boat decks, van tops, trailers, and irregular surfaces — then stays put through rain, wind, snow, and heat with an IP68 waterproof rating. High-efficiency 22.8% PERC cells deliver real output where conventional panels can't go.
360° Bendable — Fits Any Surface
Conforms to curved RV rooftops, boat decks, van tops, trailer skins, and irregular mounting surfaces where rigid glass panels can't be used. A single flexible panel covers contoured surfaces that would otherwise require custom framing or go without solar entirely.
200W at 8.6 lbs — Lightweight Power
At 0.1 inches thick and 8.6 lbs, the PRO FLEX weighs a fraction of a comparable rigid panel — reducing roof load, easing handling during installation, and making it practical for weight-sensitive builds like racing trailers, lightweight campers, and performance boat decks.
IP68 Waterproof, Walkable, All-Weather
IP68-rated waterproofing seals out rain, moisture, dust, and submersion. Rated for 5400 Pa front load and 2400 Pa back load. The surface is walkable — durable enough to withstand foot traffic during routine rooftop maintenance and access without panel damage.
Product Overview
The Rich Solar MEGA 200 PRO FLEX is a 200-watt, 24-volt flexible solar panel designed for installations where the shape, weight, or structural requirements of the mounting surface make rigid glass panels impractical or impossible. At 57.8 × 31.3 × 0.1 inches and 8.6 lbs, it mounts flush to curved and flat surfaces alike — conforming to the contours of a fiberglass RV roof, an aluminum boat deck, a composite van top, or a fabric trailer skin with a flex radius that accommodates virtually any real-world installation geometry.
Unlike fabric folding panels designed for temporary use, the MEGA 200 PRO FLEX is built for permanent outdoor installation. High-efficiency PERC monocrystalline cells rated at 22.8% maximum cell efficiency are encapsulated in a durable, weatherproof polymer backing rather than a fragile glass substrate — maintaining flexibility without sacrificing the longevity and output consistency expected from a fixed solar installation. The IP68 waterproof rating covers the full panel surface and pre-attached MC4 connectors, making it suitable for coastal marine environments, high-humidity climates, and year-round outdoor exposure.
Operating at 34.2V Vmp and 40.8V Voc, the PRO FLEX is a 24-volt system panel — ideal for 24V battery banks and compatible with MPPT charge controllers configured for 24V or 48V arrays when wired in series. It also operates compatibly with 12V system controllers that accept higher panel input voltage, making it flexible for both 12V and 24V architecture depending on your charge controller's configuration.
Goes Where Rigid Panels Can't
- 360° Bendable Construction: Flexes in any direction to conform to curved, contoured, and irregular mounting surfaces — no framing, tilt brackets, or structural modification required.
- Curved RV Roof Ready: Lays flat against the natural curve of a fiberglass or aluminum RV roof without the air gaps and wind resistance that come with raised rigid panel mounts.
- Low Profile Installation: At just 0.1 inches thick, it adds virtually no height to the rooftop — reducing wind drag on moving vehicles compared to raised rigid panel frames.
- Marine Deck Compatible: Conforms to the camber of boat decks and hull surfaces where flat rigid panels create gaps, flex points, and installation challenges.
- Walkable Surface: Engineered to handle foot traffic during installation and rooftop access — no need to work around fragile glass while mounting or maintaining adjacent equipment.
High-Efficiency PERC Cells, Real-World Output
- 22.8% Maximum Cell Efficiency: High-efficiency PERC monocrystalline cells convert a greater percentage of available sunlight into usable power compared to standard monocrystalline or polycrystalline cell designs.
- Reliable Weak-Light Performance: Continues generating meaningful output on overcast days, in diffuse light, and during early morning and late evening hours — reducing daily charging dead time.
- Low Temperature Coefficient (-0.35%/°C): Maintains strong output on hot rooftops and in high-temperature environments — less efficiency loss on peak summer days than many competing flexible panels.
- Consistent Output Across Angles: Flush-mounted installation on a curved surface naturally varies the panel's sun angle across its length — PERC cell technology handles off-angle incidence better than older cell designs.
Built to Endure Any Environment
- IP68 Waterproof Rating: The highest common waterproofing standard — fully sealed against rain, dust, splashing, and submersion. Suitable for marine decks, coastal environments, and year-round rooftop installations without additional weatherproofing.
- 5400 Pa Front Load / 2400 Pa Back Load: Rated for the same wind and snow load standards used across the MEGA rigid panel lineup — engineered for permanent outdoor installation, not just occasional fair-weather use.
- Wide Operating Temperature Range: Functions reliably from -40°F to +185°F — covering desert summer rooftops, mountain winters, and everything in between.
- UV and Weathering Resistant Backing: The flexible polymer encapsulation is formulated for UV stability and long-term outdoor exposure without cracking, delaminating, or yellowing.
Multiple Mounting Options, Simple Setup
- Adhesive Mount: Bond directly to fiberglass, aluminum, or composite roof surfaces using compatible marine-grade or RV-grade adhesive — no drilling, no penetrations, no frame hardware.
- Velcro Mount: Attach with industrial-strength hook-and-loop for semi-permanent installations where removal or repositioning may be needed.
- Pre-Drilled Holes: Edge grommets allow mechanical fastening with screws or bolts for permanent, high-vibration, or high-wind installations that require more secure attachment.
- Hang Mount: Suspend vertically or at an angle from hooks or lines — useful for wall-mounted, tent, or shelter installations outside of traditional rooftop use.
- Plug-and-Play MC4 Connectors: Pre-attached MC4 leads connect directly to a compatible charge controller or existing MC4-wired solar array without additional splicing or connector installation.
Best Uses
- Curved RV and motorhome rooftop solar installations
- Camper van and Sprinter van roof builds
- Boat, sailboat, and yacht deck solar charging
- Trailer tops and horse trailer solar systems
- Golf cart solar charging
- Off-grid cabin and shed installations on metal or curved roofs
- Overlanding roof rack and RTT solar setups
- Any install where rigid panel framing is impractical
Key Benefits
- 360° bendable — conforms to curved and irregular surfaces
- Ultra-thin 0.1" profile reduces wind drag on moving vehicles
- 8.6 lbs — significantly lighter than comparable rigid panels
- 22.8% PERC cell efficiency with strong weak-light output
- IP68 waterproof — suitable for marine and coastal environments
- Walkable surface for safe rooftop access during maintenance
- 5400 Pa / 2400 Pa load ratings for permanent outdoor install
- Adhesive, Velcro, pre-drilled, or hang mounting options
Where the MEGA 200 PRO FLEX Gets Installed
Camper Vans
Boats & Yachts
Trailers
Golf Carts
Outdoor Use
Off-Grid Cabins
| Specifications | |
| Model SKU | RS-F200PB |
|---|---|
| Maximum Power ( Pmax) | 200W |
| Maximum Power Voltage (Vmp) | 34.2V |
| Maximum Power Current (Imp) | 5.85A |
| Open Circuit Voltage (Voc) | 40.8V |
| Short Circuit Current (Isc) | 6.23A |
| Maximum System Voltage (Vmax) | 1500V DC |
| Temperature Range | -40°F~ +185°F |
| Weight | 8.6 lb |
| Dimensions | 57.8 × 31.3 × 0.1 in |
