1 / 4
Jackery HomePower 1000 v2 Portable Power Station Jackery HomePower 1000 v2 Portable Power Station
SKU: 21-0001-000445
- 1,024Wh LiFePO4 battery | Stored energy for your selected essentials
- 1,500W rated AC output | 3,000W surge; three AC outlets share the limit
- Wall, solar and vehicle charging | Solar panels and car cable sold separately
Jackery · Black power station
Keep your everyday essentials within reach.
When the lights go out, you want a simple way to keep the things you rely on running. The black Jackery HomePower 1000 v2 gives you stored battery power for compatible plug-in appliances, work devices, and everyday electronics. Charge it ahead of time, decide which loads matter most, and move it where you need it.
This listing includes the power station and AC charging cable. Add compatible solar panels later, or choose the solar bundle below.
Start with what you want to run.
Make a short list of your essentials: your router and modem, a laptop, lights, or a compatible refrigerator. Check each device’s input rating and add up the loads you expect to use together.
- The combined continuous AC load must stay within 1,500W.
- Motor-driven appliances also need enough startup power; check their surge requirement.
- The three AC outlets share the output limit. They are not three separate 1,500W supplies.
Choose the right size for your day.
This is a 120V portable station for selected appliances. Its battery capacity determines how long a load can run; its output rating determines whether it can power that load in the first place.
High-draw heating and cooking appliances use stored energy quickly. If you want to cover several large loads or a long outage, compare a larger setup before ordering.
What could that battery mean for runtime?
These are planning examples for steady AC loads, using an assumed 85% usable-energy allowance: 1,024Wh × 0.85 ÷ watts. They are calculations, not measured tests or promised appliance runtimes.
Actual runtime depends on conversion losses, the station’s own consumption, temperature, battery condition, and device behavior. Refrigerators cycle on and off, so use measured energy consumption when possible.
Charge before you need it.
Solar charging is available when you add a compatible panel. This station has two DC8020 inputs and supports up to 400W of combined solar input within its voltage and current limits. Start with the exact panel model and connection requirements before choosing cables.
For wall charging, connect the included AC cable to the station and a suitable grounded outlet. Vehicle charging needs a compatible car charging cable, sold separately; follow the manual and avoid draining the vehicle’s starter battery.
The cables to plan for.
The AC charging cable is included. Solar panels and the car charging cable are sold separately. For solar, match the panel cable or adapter to the station’s DC8020 input; a connector that fits does not establish electrical compatibility.
If you expand the solar setup, check the full array against the station’s 16–60V solar input range, current limits, and 400W combined maximum. Follow Jackery’s instructions for matching both input ports. An extension cable and a multi-panel connector perform different jobs.
Choose your configuration.
Want solar charging included from the start? Choose the matching bundle with one SolarSaga 200W panel. Both colors use the same 1,024Wh capacity and 1,500W rated AC output.
Battery backup for a desk or essential device.
The HomePower 1000 v2 supports automatic battery switchover within 10 milliseconds in its UPS mode. It is not a zero-interruption supply: test compatibility with your equipment before relying on it. The manual specifies a separate 12A maximum AC bypass limit while connected to wall power.
Its LiFePO4 battery is rated by Jackery for 6,000 cycles to at least 70% capacity under the manufacturer’s conditions. Keep the station dry, leave room for ventilation, and follow the manual’s operating and storage instructions.
Compare nearby Jackery models
Choose by actual load, energy use, port voltage, and charging plan:
Open the Specifications, Package Includes, and FAQ tabs above for this configuration. Read the Jackery HomePower 1000 v2 manual (PDF, approximately 40MB) for operating limits, charging instructions, and warranty terms.
Read our home-backup sizing guide · Compare Jackery power stations
| JACKERY HOMEPOWER 1000 V2 | |
| Selected variant SKU | 21-0001-000445 |
|---|---|
| Product | Jackery HomePower 1000 v2 |
| Station model | JHP-1000A |
| Station color | Black |
| Battery capacity | 1,024Wh (20Ah / 51.2V DC) |
| Battery chemistry | LiFePO4 |
| Rated AC output | 1,500W total |
| Surge AC output | 3,000W peak |
| AC outlets | 3 × 120V, 60Hz; shared output limit |
| USB-C ports | 1 × 100W maximum; 1 × 30W maximum |
| USB-A port | 1 × 18W maximum |
| DC output | 12V, 10A maximum |
| AC input | 100–120V, 60Hz, 15A maximum |
| AC bypass | 100–120V, 60Hz, 12A maximum |
| Solar input | 2 × DC8020; 16–60V, 12A per port; 21A / 400W combined maximum |
| Car input | 11–16V, 8A maximum combined; car charging cable sold separately |
| Battery cycle rating | 6,000 cycles to 70%+ capacity (manufacturer rating) |
| Station weight | Approximately 23.4 lb (10.6 kg) |
| Station dimensions | 12.4 × 7.9 × 9.2 in |
| Charge / discharge temperature | 14°F to 113°F (-10°C to 45°C) |
| UPS switchover | Within 10ms; not 0ms |
| Solar panel included | No; sold separately |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.