Renogy 200W 12V ShadowFlux Anti-Shading N-Type Solar Panel - 1 Panel Renogy 200W 12V ShadowFlux Anti-Shading N-Type Solar Panel
SKU: RSP200DC-ASR-G1-US
- Per-panel power 200W
- Open-circuit voltage 36.5V
- Panel weight 23.83 lb
ShadowFlux™ Anti-Shading N-Type Solar
Renogy ShadowFlux™ 200W Anti-Shading N-Type Solar Panel
The Renogy 200W 12V ShadowFlux Anti-Shading N-Type Solar Panel is a rigid solar panel for RV, mobile, and off-grid applications. It delivers up to 200W at standard test conditions, with a 36.5V open-circuit voltage, 31.3V optimum operating voltage, and 20.7% module efficiency.
Solar That Powers Through Partial Shade
ShadowFlux is designed to help maintain solar production during partial-shade conditions. In the supplied product illustration, the panel is shown producing 85% output under a 10% building-shadow condition; this is an illustrated result rather than a universal output guarantee. The media also identifies 28 bypass diodes as part of the panel configuration.
Plan the array around actual voltage and current
This is a 200W rating per panel under standard test conditions. Before choosing a pack, check each panel’s 36.5V open-circuit voltage and 6.86A short-circuit current against the receiving charge controller’s limits. For multi-panel arrays, the total voltage and current depend on whether the panels are wired in series or parallel.
SmartTech for Steadier Solar Output
ShadowFlux™ technology is designed to help the panel continue producing useful solar output during partial shading, reducing the effect of shaded areas on overall generation.
Power Longer, Save More
Renogy presents ShadowFlux™ as maintaining up to 85% output under the illustrated shading condition, supporting higher energy harvest over time.
Long-Term Value Estimate
Renogy’s source calculation estimates up to 6,500 kWh in additional lifetime production, valued at approximately $1,500, based on a 200W panel scenario.
Designed for Longer Service Life
Renogy states an expected five-year lifespan advantage in its illustrated comparison, with actual lifespan dependent on use conditions.
Next-Generation N-Type Cell Performance
The N-Type cell design uses an N-type silicon wafer, Tunnel SiOx, and N+ poly-Si construction. The supplied product media also identifies 16 busbars and describes N-Type cells as having higher efficiency than P-Type cells. The verified module efficiency for this panel is 20.7%; that module figure should not be confused with the separate 25% cell-efficiency claim shown in the product media.
Charge Faster with High Efficiency
High-efficiency N-Type cells help produce greater usable energy from available sunlight, supporting faster charging within a compatible solar power system.
Tight Space, Big Power
The compact 200W panel format helps make better use of limited installation space for compatible vehicle-mounted and off-grid solar layouts.
Tested Tough for Outdoor Experience
Built for outdoor solar installations, this rigid panel has an IP67 waterproof rating and an operating-temperature range of -40°F to 185°F (-40°C to 85°C). Its listed dimensions are 49.69 × 30.08 × 1.18 inches, and its listed weight is 23.83 lb, helping buyers check fit and handling requirements before installation.
Installation examples from Renogy
Renogy offers this 200W panel in one-, two- and four-panel packs. Select the pack quantity you need, then plan mounting space using the per-panel dimensions of 49.69 × 30.08 × 1.18 inches. Customer installation images show examples, not a guaranteed energy yield.
For the complete per-panel electrical and mechanical limits, read the Renogy ShadowFlux 200W datasheet.
Plan your solar installation
Our solar panel selection guide explains how to compare panel ratings and installation needs; check this product’s electrical ratings before pairing it with other equipment.
Compare this Renogy model
36.5V Voc, 31.3V Vmp and 6.86A Isc per panel. Check the selected variant and charge-controller input limits.
Choose your Renogy 200W ShadowFlux panel configuration
Choose ShadowFlux when partial-shade tolerance is a deciding factor, while still positioning the array for unobstructed sun. It shares a 1262 × 764 × 30mm footprint with the regular 16BB N-Type model but has different voltage, current and temperature ratings. Anti-shading technology cannot restore sunlight that never reaches the cells.
What’s in the box
- 1 panel: 1 × 200W modules, 200W combined nameplate. SKU RSP200DC-ASR-G1-US.
- 2 panels: 2 × 200W modules, 400W combined nameplate. SKU RSP200DC-ASRx2-US.
- 4 panels: 4 × 200W modules, 800W combined nameplate. SKU RSP200DC-ASRx4-US.
Each module includes its attached output leads. This is a panel-only purchase: the charge controller, battery, mounting kit and installation-specific wiring are separate. The Package Includes tab follows the selected option.
Match the panel to your controller
Start with 36.5V open-circuit voltage and 6.86A short-circuit current per panel, then account for the complete series/parallel arrangement, low-temperature voltage rise and the required design margins. A connector’s current rating is not the panel’s output current.
Series wiring adds voltage; parallel wiring adds current. These rigid modules do not provide regulated battery charging on their own. Use a suitable controller, or a power station whose documented PV input and connections accommodate the complete array.
| Panel Type | Rigid |
|---|---|
| Maximum System Voltage | 1000VDC |
| Maximum Series Fuse Rating | 15A |
| Module Efficiency | 20.7% |
| Material and Workmanship Warranty | 5 Years |
| Performance Warranty | 25 Years 80% Output Warranty |
| Model | RSP200DC-ASR |
| Power Per Panel at STC | 200W |
| Open-Circuit Voltage Per Panel (Voc) | 36.5V |
| Optimum Operating Voltage Per Panel (Vmp) | 31.3V |
| Short-Circuit Current Per Panel (Isc) | 6.86A |
| Optimum Operating Current Per Panel (Imp) | 6.38A |
| Dimensions Per Panel | 49.69 × 30.08 × 1.18 in / 1262 × 764 × 30mm |
| Weight Per Panel | 23.83 lb / 10.81kg |
| Panel Operating Temperature Range | -40°C to 85°C / -40°F to 185°F |
| Pack Options | 1 panel / 200W combined nameplate; 2 panels / 400W combined nameplate; 4 panels / 800W combined nameplate |
| Controller and Battery | Separate; match the final array to equipment input limits |
| Connector Rated Current | 30A (component rating, not panel output) |
| Connector Maximum Voltage | 1000V DC (component rating; observe panel/system limits) |
| Connector Temperature Range | -40°C to 90°C |
| Number of Cells | 52 (4 × 13) |
| Nominal Operating Cell Temperature (NOCT) | 45 ± 2°C |
| Temperature Coefficient of Pmax | -0.29%/°C |
| Temperature Coefficient of Voc | -0.25%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Output Cables | 14 AWG, 600mm / 23.6 in |
| Junction Box — IP Rating | IP67 |
| Solar Connector — IP Rating | IP68 |
| Frame | Anodized aluminum alloy |
| Front Glass | Tempered glass, 3.2mm |
| Panels in Selected Pack | 1 |
| Selected Pack Nameplate Total | 200W (STC; before system losses) |
| Selected Pack SKU | RSP200DC-ASR-G1-US |
| Selected variant SKU | RSP200DC-ASR-G1-US |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Panel Type | Rigid |
|---|---|
| Maximum System Voltage | 1000VDC |
| Maximum Series Fuse Rating | 15A |
| Module Efficiency | 20.7% |
| Material and Workmanship Warranty | 5 Years |
| Performance Warranty | 25 Years 80% Output Warranty |
| Model | RSP200DC-ASR |
| Power Per Panel at STC | 200W |
| Open-Circuit Voltage Per Panel (Voc) | 36.5V |
| Optimum Operating Voltage Per Panel (Vmp) | 31.3V |
| Short-Circuit Current Per Panel (Isc) | 6.86A |
| Optimum Operating Current Per Panel (Imp) | 6.38A |
| Dimensions Per Panel | 49.69 × 30.08 × 1.18 in / 1262 × 764 × 30mm |
| Weight Per Panel | 23.83 lb / 10.81kg |
| Panel Operating Temperature Range | -40°C to 85°C / -40°F to 185°F |
| Pack Options | 1 panel / 200W combined nameplate; 2 panels / 400W combined nameplate; 4 panels / 800W combined nameplate |
| Controller and Battery | Separate; match the final array to equipment input limits |
| Connector Rated Current | 30A (component rating, not panel output) |
| Connector Maximum Voltage | 1000V DC (component rating; observe panel/system limits) |
| Connector Temperature Range | -40°C to 90°C |
| Number of Cells | 52 (4 × 13) |
| Nominal Operating Cell Temperature (NOCT) | 45 ± 2°C |
| Temperature Coefficient of Pmax | -0.29%/°C |
| Temperature Coefficient of Voc | -0.25%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Output Cables | 14 AWG, 600mm / 23.6 in |
| Junction Box — IP Rating | IP67 |
| Solar Connector — IP Rating | IP68 |
| Frame | Anodized aluminum alloy |
| Front Glass | Tempered glass, 3.2mm |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.



















