Renogy Battery Shunt 300 + ONE Core Monitoring Kit Renogy Battery Shunt 300 + ONE Core Monitoring Kit
SKU: KIT-B02P300-W02W-US
See what your battery system is actually doing
The Renogy Battery Shunt 300 and ONE Core kit combines current measurement with a compatible monitoring display. It helps you follow charging, discharge and battery state of charge instead of estimating remaining capacity from voltage alone.
A matched monitoring package
This is the manufacturer’s KIT-B02P300-W02W-US package, including the shunt and ONE Core. The shunt measures the current passing through the battery’s negative circuit. Correct installation and calibration matter: a load or charger connected around the shunt will not be measured.
Size the monitor for current, not just battery capacity
The shunt’s 300A continuous limit is a current rating. Check your largest expected charge and discharge currents, including inverter demand, against the technical limits below. The kit is a monitoring tool; it does not replace a battery management system, charger or circuit protection.
Plan the wiring and remote access
Provide the correct power source for each device and follow the manufacturer connection diagrams. The shunt’s wide supply range does not establish the display’s voltage rating. For help planning an RV or off-grid battery system, use our power planner and describe the equipment you already have.
| Manufacturer kit SKU | KIT-B02P300-W02W-US |
|---|---|
| Kit components | Battery Shunt 300 and Renogy ONE Core |
| Shunt model family | RSHST-B02P300 |
| Shunt supply range | 8–120V DC; this is not the ONE Core display supply rating |
| Shunt maximum continuous current | 300A |
| Shunt peak current | 500A for less than 10 seconds |
| Battery capacity setting | 1–6500Ah |
| Shunt communication | Bluetooth LE and BLE Mesh |
| Shunt current accuracy | ±1% |
| Shunt current resolution | 0.01A |
| Shunt voltage resolution | 10mV |
| Shunt operating temperature | −10°C to 50°C / 14°F to 122°F |
| Shunt dimensions | 134 × 97 × 31 mm / 5.27 × 3.82 × 1.22 in |
| Shunt weight | 260g / 0.57 lb |
| Battery connection | M10 bolts; follow manual placement and torque instructions |
| Installation | All monitored load/charger negative paths must pass through the shunt |
| Remote access | Requires supported ONE Core configuration, account and internet connectivity; no cellular subscription included |
| ONE Core revision | Kit is sold by exact manufacturer kit SKU; no unverified display-generation claim |
| Selected variant SKU | KIT-B02P300-W02W-US |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


