Renogy Core 48V 50Ah Smart Lithium Iron Phosphate Battery w/Self Heating - 2 Batteries Renogy Core 48V 50Ah Smart Lithium Iron Phosphate Battery w/Self Heating
SKU: RBT4850LFPSHx2-US
- Energy per battery 2.4kWh
- Charge target 54V
- Continuous discharge per battery 50A
48V self-heating storage with a defined charging profile
The Renogy Core LT 48V 50Ah battery provides 2.4kWh nominal storage per unit for a compatible off-grid or backup power system. Select one, two or four batteries. Its 54V charge target, 50A continuous output and parallel-only expansion distinguish it from other batteries sold under the broad “48V” label.

Choose your storage capacity
One battery stores 2.4kWh nominal. Two provide 4.8kWh and four provide 9.6kWh; up to eight matching batteries in parallel provide 19.2kWh. A parallel bank stays at 48V nominal. Do not connect this model in series or mix it with a 51.2V battery simply because both are marketed for 48V systems.
What self-heating needs to work
The manual requires a stable charge current greater than 3.5A for each battery in the parallel bank. Heating starts below 32°F (0°C) and stops above 41°F (5°C); the manual lists 200W heater power. The operating range can extend to -4°F (-20°C) with heating, but cells must warm before normal charging. Weak winter solar input may not provide enough current to heat every battery.
Match the inverter and charger
Set the supported charge/boost/bulk target to 54V (±0.2V), within the 50A continuous charging limit per battery. Discharge is rated at 50A continuous and 100A for 5 seconds per the manual. One unit’s nominal continuous DC equivalent is 2,400W before conversion losses, so one battery cannot run a 3,500W AC inverter at full continuous output. There is no built-in Bluetooth or communication port; “Smart” refers to battery management, not confirmed inverter communication.
Case, installation and protection
The ABS case measures 15.1 × 7.6 × 9.8 in and weighs 51.4 lb. IP65 describes dust and water resistance, not submersion or permission to leave terminals exposed. Secure the battery in a dry, protected location and follow the manual’s terminal torque, balancing, fusing and cable guidance.
What’s in the box
Each battery comes with two M8 × 1.25 × 20 mm long terminal bolts, two insulating sleeves and one user manual. These quantities multiply with the selected two- or four-pack. A charger, inverter, bank cables, busbars and external monitor are separate. Package Includes below follows the selected variant.
Compare system voltage before buying
Browse Renogy batteries and 48V lithium batteries. The Rich Solar ALPHA 5 PRO 51.2V 100Ah is a comparison option with a different charging profile and case format, not a battery to mix into this bank. Use the power planner to estimate loads before confirming inverter and battery compatibility.
Manuals and warranty
The Documentation tab contains the exact-model manual, specification sheet and Renogy US Limited Warranty A7. These Core models carry a five-year prorated material and workmanship warranty under that policy.
| Selected Product SKU | RBT4850LFPSHx2-US |
|---|---|
| Batteries in Selected Pack | 2 |
| Total Nominal Energy in Selected Pack | 4800Wh / 4.8kWh (calculated; usable energy is lower) |
| Specification Basis | Electrical, weight and dimensional ratings below are per battery unless explicitly labeled as pack totals |
| Battery Type | Lithium Iron Phosphate |
| Voltage | 48V |
| Rated Capacity | 50Ah |
| Voltage Range | 42V to 55.5V |
| Energy | 2,400Wh |
| Cycle Life (0.5C, 25℃) | >6,000 Cycles (80% DOD, 80% EOL) |
| Connection Method | Parallel only, up to 8 identical batteries; no series connection |
| Self-Heating | Yes; charging current greater than 3.5A per battery required |
| Charge Cut-Off Voltage | 54V |
| Maximum Continuous Charge Current | 50A |
| Maximum Continuous Discharge Current | 50A |
| Operation Temperature Range (Charge) | Cell charging: 0°C to 55°C / 32°F to 131°F; manual ambient operation down to -20°C / -4°F with self-heating |
| Operation Temperature Range (Discharge) | -4°F to 140°F / -20°C to 60°C |
| Storage Temperature Range | -13°F to 149°F / -25°C to 65°C |
| Standard Operation Temperature | 77°F ± 9°F / 25°C ± 5°C |
| Relative Humidity | 5% to 95% |
| Dimensions (L x W x H) | 15.1 x 7.6 x 9.8 in / 384 x 195 x 248mm |
| Weight | 51.4 lbs / 23.3kg |
| Terminal Bolt | M8; manual terminal bolt M8 x 1.25 x 15 mm; included long bolts M8 x 1.25 x 20 mm |
| Protection Rating | IP65 |
| Housing Material | ABS |
| Built-in Bluetooth | No |
| Communication Port | No |
| MSDS, UN38.3, FCC, IC, UKCA, CE, PSE, RoHS | Yes |
| Material and Workmanship Warranty | 5-year prorated material and workmanship warranty; subject to Renogy US Limited Warranty A7 |
| Manufacturer Model | RBT4850LFPSH / Core LT |
| Heater Control | Starts below 0°C / 32°F; stops above 5°C / 41°F; manual lists 200W |
| Peak Discharge Current | 100A for 5 seconds (manufacturer manual) |
| Recommended Terminal Torque | 10 to 12 N·m / 88.5 to 106.2 in-lb |
| Available Pack Options | 1 / 2 / 4 batteries: 2.4 / 4.8 / 9.6kWh total nominal |
| Charge Voltage | 54.0V ±0.2V charge / boost / bulk target |
| Standard Charge Procedure | Manual: 50A to 54V, taper to less than 2.5A; approximately 1.5 hours under stated conditions |
| Nominal DC Power at Continuous Current | 2400W per battery at 48V x 50A; AC output is lower after inverter losses |
| Selected variant SKU | RBT4850LFPSHx2-US |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Battery Type | Lithium Iron Phosphate |
|---|---|
| Voltage | 48V |
| Rated Capacity | 50Ah |
| Voltage Range | 42V to 55.5V |
| Energy | 2,400Wh |
| Cycle Life (0.5C, 25℃) | >6,000 Cycles (80% DOD, 80% EOL) |
| Connection Method | Parallel only, up to 8 identical batteries; no series connection |
| Self-Heating | Yes; charging current greater than 3.5A per battery required |
| Charge Cut-Off Voltage | 54V |
| Maximum Continuous Charge Current | 50A |
| Maximum Continuous Discharge Current | 50A |
| Operation Temperature Range (Charge) | Cell charging: 0°C to 55°C / 32°F to 131°F; manual ambient operation down to -20°C / -4°F with self-heating |
| Operation Temperature Range (Discharge) | -4°F to 140°F / -20°C to 60°C |
| Storage Temperature Range | -13°F to 149°F / -25°C to 65°C |
| Standard Operation Temperature | 77°F ± 9°F / 25°C ± 5°C |
| Relative Humidity | 5% to 95% |
| Dimensions (L x W x H) | 15.1 x 7.6 x 9.8 in / 384 x 195 x 248mm |
| Weight | 51.4 lbs / 23.3kg |
| Terminal Bolt | M8; manual terminal bolt M8 x 1.25 x 15 mm; included long bolts M8 x 1.25 x 20 mm |
| Protection Rating | IP65 |
| Housing Material | ABS |
| Built-in Bluetooth | No |
| Communication Port | No |
| MSDS, UN38.3, FCC, IC, UKCA, CE, PSE, RoHS | Yes |
| Material and Workmanship Warranty | 5-year prorated material and workmanship warranty; subject to Renogy US Limited Warranty A7 |
| Manufacturer Model | RBT4850LFPSH / Core LT |
| Heater Control | Starts below 0°C / 32°F; stops above 5°C / 41°F; manual lists 200W |
| Peak Discharge Current | 100A for 5 seconds (manufacturer manual) |
| Recommended Terminal Torque | 10 to 12 N·m / 88.5 to 106.2 in-lb |
| Available Pack Options | 1 / 2 / 4 batteries: 2.4 / 4.8 / 9.6kWh total nominal |
| Charge Voltage | 54.0V ±0.2V charge / boost / bulk target |
| Standard Charge Procedure | Manual: 50A to 54V, taper to less than 2.5A; approximately 1.5 hours under stated conditions |
| Nominal DC Power at Continuous Current | 2400W per battery at 48V x 50A; AC output is lower after inverter losses |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


