Continuous output
12,000W rated AC output; 24,000W temporary peak. Size continuous loads and starting surges separately.
SKU: FR12K-B
Power a professionally designed 48V battery-backed system with 12,000W continuous pure sine wave output, selectable 120V or 120/240V operation and two MPPT solar inputs. Match the array and battery bank to the exact limits below.
Its two MPPTs accept up to 6.6kW each (13.2kW combined PV input), with 500V maximum PV open-circuit voltage and a 125–425V MPPT range. Check each string’s cold-weather Voc and 22A input-current limit. Battery voltage is 48V nominal with a 40–60V operating range; verify BMS current and charging settings before buying batteries.
For different system sizes, compare the SunGoldPower 10kW split-phase inverter or SunGoldPower 11.4kW hybrid inverter. These are different models and installation modes, not interchangeable wiring plans.
12,000W rated AC output; 24,000W temporary peak. Size continuous loads and starting surges separately.
13,200W total (6600W per MPPT); 500V maximum cold-corrected array Voc and 22A per MPPT.
200A maximum combined charging; 120A maximum from AC. Set both within the battery bank’s permitted current.
Choose FR12K-B for its continuous output, input limits and installation format. A 48V label alone does not establish battery compatibility: usable energy, discharge current, charging settings and the supported communication protocol all matter.










| Buying checkpoint | FR12K-B |
|---|---|
| AC output | 12,000W continuous / 24,000W peak |
| Battery bank | 48V nominal; 40–60V operating range |
| Solar inputs | 13,200W total (6600W per MPPT); 22A per MPPT |
| PV voltage | 500V maximum Voc; 125–425V DC MPPT |
| Charging | 200A combined maximum; 120A AC maximum |
| Enclosure | IP20; indoor installation |
This model can be configured for 120V single-phase or 120/240V split-phase output. Its total wattage is not a promise of the full rating on either individual 120V leg. Have the installer check load balance, surge demand and the manual’s wiring configuration. Peak output is a temporary starting allowance, not the power available continuously.
FR12K-B accepts 13,200W total (6600W per MPPT), with 22A per MPPT. Keep each string’s cold-corrected open-circuit voltage below 500V and operating voltage within 125–425V DC. Panel wattage alone does not establish a suitable string. Battery charging amperage is measured on the battery side and must not be used as the PV input-current rating.
FR12K-B allows up to 200A combined charging and 120A AC charging. Do not add the solar and AC current ratings together. Set charging current to the battery bank’s own limit, and verify its continuous discharge capability at the lowest expected operating voltage. Battery capacity determines runtime; the inverter’s watt rating determines supported load power.
These are inverter-only selections. Batteries, panels and site-specific installation wiring/protection are separate. Wi-Fi logger included in the manufacturer packing list.
The built-in APsmart transmitter is one part of the rapid-shutdown system. The manual requires compatible module-level APsmart RSD devices and an external accessible shutdown switch. Those components are not in the inverter packing list; the installer must specify the complete array arrangement.
The IP20 enclosure is intended for indoor installation. Keep airflow clear and account for output derating above 45°C. A standalone-inverter certificate does not by itself authorize utility export or establish approval for a complete installation.
SunGoldPower advertises a 2-year warranty in these product pages’ warranty banner. Keep proof of purchase and review SunGoldPower warranty terms for coverage and exclusions.
The manual and datasheet give different housing dimensions. Confirm the delivered revision before drilling: manual 28.7 × 19.1 × 6.7 in; datasheet 28.48 × 17.64 × 5.91 in. Both list approximately 28kg (61.73lb).
Compare SunGoldPower inverters by battery voltage, continuous output and PV limits. SPH10048P 10kW inverter. Different models have different installation requirements; increasing inverter wattage does not increase battery runtime.
| Model | FR12K-B |
|---|---|
| Inverter Type | All-in-one off-grid solar inverter / charger |
| Continuous AC Output | 12,000W |
| Peak Output | 24,000W; temporary surge, not continuous output |
| AC Output Configuration | 120V single-phase or 120/240V split-phase; configure per manual |
| Output Waveform | Pure sine wave |
| Output Frequency | 50 / 60Hz |
| Nominal Battery Voltage | 48V DC |
| Battery Operating Range | 40–60V DC; match battery/BMS settings |
| Battery Profiles | Lead-acid and lithium profiles; exact charging limits and BMS protocol must match the battery |
| Maximum PV Array Power | 13,200W total (6600W per MPPT) |
| Maximum PV Open-Circuit Voltage | 500V DC; account for cold-weather string Voc |
| MPPT Operating Range | 125–425V DC |
| Maximum PV Input Current | 22A per MPPT |
| MPPT Inputs | 2 independent trackers |
| Maximum AC Charging Current | 120A |
| Maximum Combined Battery Charging Current | 200A; solar and AC limits are not additive |
| Battery-to-AC Inverter Efficiency | 92% maximum |
| Typical Transfer Time | 10ms; not a zero-interruption guarantee |
| Parallel Operation | Up to 6 matching units; 72kW combined rated output |
| Communications | RS485, CAN, USB and dry contact; Wi-Fi logger included per packing list |
| Wi-Fi Package Status | Wi-Fi logger included in the manufacturer packing list |
| Installation / Enclosure | IP20; indoor installation |
| Operating Temperature | -10°C to 55°C; output derates above 45°C |
| Cooling | Forced-air cooling; keep ventilation clear |
| Dimensions | Manual: 28.7 × 19.1 × 6.7 in; datasheet: 28.48 × 17.64 × 5.91 in. Confirm supplied revision before mounting. |
| Net Weight | 28kg (61.73lb) |
| Warranty | 2 years as advertised in the manufacturer product-page warranty banner; manufacturer terms and proof of purchase apply |
| Package Contents | 1 × FR12K-B inverter; 2 × M5 × 10 mm Phillips screws; 1 × Shipment inspection report; 4 × SC50-8 copper lugs; 1 × M8 socket screwdriver; 4 × M4 × 8 mm black screws; 5 × M8 × 12 mm Phillips screws; 1 × Flat-head screwdriver; 2 × SC95-8 copper lugs; 1 × Wi-Fi logger; 1 × User manual; 1 × Warranty card; 4 × M6 × 60 mm expansion screws; 1 × Parallel communication cable; 1 × Certificate of conformity; 1 × BMS communication cable |
| Sold Separately | Battery bank, solar panels, site wiring, disconnects and installation protection; this is the inverter-only SKU |
| Maximum Solar Battery Charging Current | 200A |
| MPPT Tracking Efficiency | 99.9%; separate from battery-to-AC inverter efficiency |
| Maximum AC Bypass Current | 63A; separate from rated inverter output |
| Rapid Shutdown | Built-in transmitter; requires compatible APsmart module RSD devices and an external switch for the complete system |
| Rapid-Shutdown Package Limits | Module-level RSD devices and external shutdown switch are not listed in the supplied package |
| Selected variant SKU | FR12K-B |
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Model | FR12K-B |
|---|---|
| Inverter Type | All-in-one off-grid solar inverter / charger |
| Continuous AC Output | 12,000W |
| Peak Output | 24,000W; temporary surge, not continuous output |
| AC Output Configuration | 120V single-phase or 120/240V split-phase; configure per manual |
| Output Waveform | Pure sine wave |
| Output Frequency | 50 / 60Hz |
| Nominal Battery Voltage | 48V DC |
| Battery Operating Range | 40–60V DC; match battery/BMS settings |
| Battery Profiles | Lead-acid and lithium profiles; exact charging limits and BMS protocol must match the battery |
| Maximum PV Array Power | 13,200W total (6600W per MPPT) |
| Maximum PV Open-Circuit Voltage | 500V DC; account for cold-weather string Voc |
| MPPT Operating Range | 125–425V DC |
| Maximum PV Input Current | 22A per MPPT |
| MPPT Inputs | 2 independent trackers |
| Maximum AC Charging Current | 120A |
| Maximum Combined Battery Charging Current | 200A; solar and AC limits are not additive |
| Battery-to-AC Inverter Efficiency | 92% maximum |
| Typical Transfer Time | 10ms; not a zero-interruption guarantee |
| Parallel Operation | Up to 6 matching units; 72kW combined rated output |
| Communications | RS485, CAN, USB and dry contact; Wi-Fi logger included per packing list |
| Wi-Fi Package Status | Wi-Fi logger included in the manufacturer packing list |
| Installation / Enclosure | IP20; indoor installation |
| Operating Temperature | -10°C to 55°C; output derates above 45°C |
| Cooling | Forced-air cooling; keep ventilation clear |
| Dimensions | Manual: 28.7 × 19.1 × 6.7 in; datasheet: 28.48 × 17.64 × 5.91 in. Confirm supplied revision before mounting. |
| Net Weight | 28kg (61.73lb) |
| Warranty | 2 years as advertised in the manufacturer product-page warranty banner; manufacturer terms and proof of purchase apply |
| Package Contents | 1 × FR12K-B inverter; 2 × M5 × 10 mm Phillips screws; 1 × Shipment inspection report; 4 × SC50-8 copper lugs; 1 × M8 socket screwdriver; 4 × M4 × 8 mm black screws; 5 × M8 × 12 mm Phillips screws; 1 × Flat-head screwdriver; 2 × SC95-8 copper lugs; 1 × Wi-Fi logger; 1 × User manual; 1 × Warranty card; 4 × M6 × 60 mm expansion screws; 1 × Parallel communication cable; 1 × Certificate of conformity; 1 × BMS communication cable |
| Sold Separately | Battery bank, solar panels, site wiring, disconnects and installation protection; this is the inverter-only SKU |
| Maximum Solar Battery Charging Current | 200A |
| MPPT Tracking Efficiency | 99.9%; separate from battery-to-AC inverter efficiency |
| Maximum AC Bypass Current | 63A; separate from rated inverter output |
| Rapid Shutdown | Built-in transmitter; requires compatible APsmart module RSD devices and an external switch for the complete system |
| Rapid-Shutdown Package Limits | Module-level RSD devices and external shutdown switch are not listed in the supplied package |
Clear answers to common questions about this product, setup, compatibility, and use.