SunGoldPower SG48100P 51.2V 100Ah Server Rack LiFePO4 Battery SunGoldPower SG48100P 51.2V 100Ah Server Rack LiFePO4 Battery
SKU: SG48100P
SunGoldPower SG48100P — 5.12kWh Server Rack Battery
The SG48100P stores 5.12kWh at 51.2V nominal for a compatible 48V-class solar or backup battery system. Its 100A continuous charge and discharge limits describe power handling; the 100Ah capacity describes stored charge. Choose the inverter and cabinet using both electrical limits and the physical drawing.
SG48100P · Key specifications
SunGoldPower SG48100P | 5.12kWh Rack Battery
The SG48100P is a 51.2V, 100Ah rack-format LiFePO4 battery with 5.12kWh nominal energy and a 100A BMS rating. Plan the inverter’s peak DC current and cabinet dimensions before adding modules.
The rack case is approximately 19.3 × 18.9 × 5.5 in and 93 lb. The battery lists CAN/RS485/RS232 communication, but exact inverter firmware and cable protocol must be confirmed; a matching 48V label is insufficient.
For wall mounting, compare the SG48100M wall battery.
Charging limits, indoor installation and expansion
- Standard charge/discharge current: 50A; maximum continuous charge/discharge: 100A.
- Charging temperatures: 32–113°F (0–45°C). Discharging: −4–140°F (−20–60°C).
- Enclosure: IP20. Plan a dry, protected installation; this is not an exposed outdoor battery.
- Expansion: the current datasheet and manual support up to 63 matching batteries in parallel, with the documented addressing and protection.
The current SG48100P datasheet lists a 54.5V recommended charging voltage and 57.6V charge limit. Follow the battery manual and approved inverter/BMS profile; these are different parameters.
Two modules provide 10.24kWh nominal; four provide 20.48kWh. Those are calculated storage totals, not guaranteed AC runtime or inverter power ratings.
Compare server-rack batteries or use our 100Ah battery solar-sizing guide to plan the complete bank.
Plan the cabinet and the complete circuit
The manufacturer datasheet lists 19.3 × 18.9 × 5.5 inches and approximately 93 lb. Its manual also contains a 442 × 460 × 133mm enclosure measurement and a 43kg mass. Confirm the supplied unit’s drawing before a tight cabinet installation; allow additional room for terminal protection, cables and service access.
CAN, RS485 and RS232 communication require the correct inverter profile and cable pinout. A matching battery voltage or familiar inverter brand alone does not verify closed-loop compatibility.














Is this SG48100P battery offered with SunGoldPower’s 8kW inverter?
Yes. SunGoldPower lists an option pairing two SG48100P rack batteries with its SPH8048P 8kW off-grid inverter. Two 5.12kWh batteries provide 10.24kWh nominal storage. The listed option is evidence for this model pairing, but the final installation still needs the specified battery count, current limits, firmware, BMS communication settings, protection and wiring checked against current manuals.
Compare the SPH8048P inverter and the manufacturer’s inverter and battery options for this exact pairing.
| 51.2V 100AH SERVER RACK LIFEPO4 LITHIUM BATTERY SG48100P | |
| Selected variant SKU | SG48100P |
|---|---|
| MODEL | |
| Model / SKU | SG48100P |
| Product Type | Battery |
| ELECTRICAL | |
| Battery Chemistry | LiFePO4 |
| Nominal Voltage | 51.2 V |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| BMS Current | 100 A |
| Maximum Parallel Units | 63 |
| Inverter Communication | CAN / RS485 / RS232; verify exact inverter profile, firmware and cable pinout |
| CONNECTIONS | |
| PHYSICAL | |
| Dimensions (current datasheet) | 19.3 × 18.9 × 5.5 in; confirm supplied-unit drawing for tight rack fit |
| Weight (current datasheet) | Approximately 93 lb |
| OPERATING LIMITS | |
| Cycle Life | More than 7,000 cycles at 0.5C and 80% depth of discharge |
| Charging and Environmental Limits | |
| Standard Charge Current | 50A |
| Maximum Continuous Charge Current | 100A |
| Standard Discharge Current | 50A |
| Maximum Continuous Discharge Current | 100A |
| Recommended Charging Voltage | 54.5V, per current manufacturer datasheet |
| Charging Limited Voltage | 57.6V |
| Discharge Cutoff Voltage | 43.2V |
| Charge Temperature | 0°C to 45°C / 32°F to 113°F |
| Discharge Temperature | −20°C to 60°C / −4°F to 140°F |
| Storage Ambient Temperature | −10°C to 45°C / 14°F to 113°F (datasheet); follow manual storage procedure |
| Recommended Storage Temperature | 0°C to 30°C (manual performance table) |
| Maximum Operating Relative Humidity | 95% |
| Enclosure Protection | IP20; protected indoor installation |
| Physical Revision Note | Manual gives 442 × 460 × 133mm and approximately 43kg; current datasheet gives the dimensions/weight above. Confirm supplied revision before cabinet fabrication. |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


