SunGoldPower SG48100M 5.12kWh 51.2V 100Ah Wall Battery SunGoldPower SG48100M 5.12kWh 51.2V 100Ah Wall Battery
SKU: SG48100M
- Nominal storage 5.12kWh / 100Ah
- Battery system 51.2V / LiFePO4
- Installation Wall mounted / IP20
SG48100M: choose storage that fits your system
Build a modular 48V-class solar-storage or backup bank with the SG48100M, a 51.2V 100Ah wall-mounted LiFePO4 battery. One module stores 5.12kWh nominal and includes an LCD, BMS, output leads and mounting hardware.

Capacity, charging and load support
The battery supports 50A standard charging and discharge, with 100A maximum continuous charging and discharge. Its 5.12kWh capacity describes stored energy; it is not a 5.12kW AC inverter rating. Match the inverter and protection to the battery current limits, expected loads and reserve.
Installation and temperature limits
This is an IP20 battery for a protected installation. Manufacturer documents disagree on enclosure dimensions: the manual gives 420 × 580 × 140mm, while the datasheet gives 420 × 600 × 140mm. Both documents list approximately 43kg (94.8lb), but current retail artwork shows 114.6lb and 23 × 16.5 × 6in. Confirm the delivered revision before drilling mounting holes or ordering a fitted enclosure.
The manual specifies charging at 0–45°C and discharge at −20–60°C. No integrated heater is verified for this model. A discharge temperature rating below freezing does not permit charging a frozen battery.


Expansion and inverter communication
The current manufacturer page, datasheet and linked manual support up to 63 matching batteries in parallel, nominally 322.56kWh. That is a system ceiling; approved inverter limits, busbars, branch protection, cable sizing and communication setup still determine the usable bank.
What’s included
One battery with the following manufacturer-listed contents.
- 1 × SG48100M 5.12kWh battery
- 1 × Positive and negative output cable set — 1.5m
- 1 × RS485 cascade communication cable — 1.5m
- 1 × Wall bracket and supporting M10 expansion bolts
- 1 × User manual
- 1 × Product certificate
The Package Includes tab shows the exact quantities for the selected option. The RS232-to-USB cable is optional and is not included in the promised contents.
Compare SunGoldPower battery options
SG48100M wall battery · SGH48100T heated rack battery · Powerwall X 10.24kWh · PowerMax 314 Outdoor · CoreX 5 Pro rack battery · CoreX 5 Elite wall battery.
Browse SunGoldPower batteries, 48V-class lithium storage and SunGoldPower inverters. Select the exact supported battery and inverter configuration before ordering.
Also compare SG48100P rack battery.
Documents, warranty and model details
The UL 1973 download is a UL Recognized Component certificate covering SG48100M and SG48100P. It is not a certificate for every complete inverter-and-battery installation. The manual calls the RS232-to-USB lead optional, while retail packing artwork also shows that lead and a parallel cable set. Confirm the supplied accessory revision; the contents below follow the manual.
SG48100M user manual (PDF) · SG48100M specification sheet (PDF) · SG48100M UL 1973 recognized component certificate (PDF)
10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms. At least 7,000 cycles at 80% DoD, 0.5C, 25°C ±2°C per manual.
| Battery Chemistry | LiFePO4 (LFP) |
|---|---|
| Rated Voltage | 51.2 V nominal; 48V-class system |
| Warranty | 10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms |
| Inverter Compatibility | Confirm exact inverter model, firmware, communication protocol and cable pinout; matching nominal voltage alone is insufficient |
| Connection Method | Manufacturer-approved parallel arrangement; do not wire these storage modules in series |
| Model / SKU | SG48100M |
| Product Type | Wall-mounted storage battery |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| Recommended Charge Voltage | 54.5 V |
| Maximum Charge Voltage | 57.6 V |
| Charge Cutoff Current | 5 A |
| Discharge Cutoff Voltage | 43.2 V |
| Standard Charge / Discharge Current | 50 A |
| Maximum Continuous Charge / Discharge Current | 100 A |
| Recommended SOC Range | 20–95%; permitted working range 0–100% |
| Cycle Life | At least 7,000 cycles at 80% DoD, 0.5C, 25°C ±2°C per manual |
| Design Life | 15-year manufacturer design-life claim; warranty remains 10 years |
| Parallel Expansion | Up to 63 matching batteries; 322.56 kWh nominal system ceiling |
| Communication | RS232 / RS485 / CAN; exact protocol and pinout must match inverter |
| Display | LCD |
| Ingress Protection | IP20 |
| Cooling | Natural heat dissipation |
| Dimensions | Manual: 420 × 580 × 140 mm; datasheet: 420 × 600 × 140 mm; retail artwork: 23 × 16.5 × 6 in; confirm supplied revision |
| Weight | Manual/datasheet: approximately 43 kg (94.8 lb); retail artwork: 114.6 lb; confirm supplied revision |
| Charge Temperature Range | 0–45°C (32–113°F) |
| Discharge Temperature Range | −20–60°C (−4–140°F) |
| Storage Temperature | −10–45°C; recommended 0–30°C |
| Operating Humidity | At most 95% RH; manual recommends at most 85% |
| Certification Evidence | UL 1973 recognized component certificate MH66714, models SG48100P / SG48100M |
| Included Components (Per Module) | 1 × SG48100M 5.12kWh battery; 1 × Positive and negative output cable set — 1.5m; 1 × RS485 cascade communication cable — 1.5m; 1 × Wall bracket and supporting M10 expansion bolts; 1 × User manual; 1 × Product certificate |
| Selected SKU | SG48100M |
| Selected Battery Quantity | 1 |
| Selected Nominal Energy | 5.12 kWh |
| Selected Parallel Capacity | 100 Ah at 51.2 V nominal |
| Selected Package Contents | 1 × SG48100M 5.12kWh battery; 1 × Positive and negative output cable set — 1.5m; 1 × RS485 cascade communication cable — 1.5m; 1 × Wall bracket and supporting M10 expansion bolts; 1 × User manual; 1 × Product certificate |
| Selected variant SKU | SG48100M |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Battery Chemistry | LiFePO4 (LFP) |
|---|---|
| Rated Voltage | 51.2 V nominal; 48V-class system |
| Warranty | 10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms |
| Inverter Compatibility | Confirm exact inverter model, firmware, communication protocol and cable pinout; matching nominal voltage alone is insufficient |
| Connection Method | Manufacturer-approved parallel arrangement; do not wire these storage modules in series |
| Model / SKU | SG48100M |
| Product Type | Wall-mounted storage battery |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| Recommended Charge Voltage | 54.5 V |
| Maximum Charge Voltage | 57.6 V |
| Charge Cutoff Current | 5 A |
| Discharge Cutoff Voltage | 43.2 V |
| Standard Charge / Discharge Current | 50 A |
| Maximum Continuous Charge / Discharge Current | 100 A |
| Recommended SOC Range | 20–95%; permitted working range 0–100% |
| Cycle Life | At least 7,000 cycles at 80% DoD, 0.5C, 25°C ±2°C per manual |
| Design Life | 15-year manufacturer design-life claim; warranty remains 10 years |
| Parallel Expansion | Up to 63 matching batteries; 322.56 kWh nominal system ceiling |
| Communication | RS232 / RS485 / CAN; exact protocol and pinout must match inverter |
| Display | LCD |
| Ingress Protection | IP20 |
| Cooling | Natural heat dissipation |
| Dimensions | Manual: 420 × 580 × 140 mm; datasheet: 420 × 600 × 140 mm; retail artwork: 23 × 16.5 × 6 in; confirm supplied revision |
| Weight | Manual/datasheet: approximately 43 kg (94.8 lb); retail artwork: 114.6 lb; confirm supplied revision |
| Charge Temperature Range | 0–45°C (32–113°F) |
| Discharge Temperature Range | −20–60°C (−4–140°F) |
| Storage Temperature | −10–45°C; recommended 0–30°C |
| Operating Humidity | At most 95% RH; manual recommends at most 85% |
| Certification Evidence | UL 1973 recognized component certificate MH66714, models SG48100P / SG48100M |
| Included Components (Per Module) | 1 × SG48100M 5.12kWh battery; 1 × Positive and negative output cable set — 1.5m; 1 × RS485 cascade communication cable — 1.5m; 1 × Wall bracket and supporting M10 expansion bolts; 1 × User manual; 1 × Product certificate |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


