SunGoldPower CoreX 5 Elite 5.12kWh Wall Battery SunGoldPower CoreX 5 Elite 5.12kWh Wall Battery
SKU: CoreX 5 Elite
- Nominal storage 5.12kWh / 100Ah
- Battery system 51.2V / LiFePO4
- Installation Wall mounted / IP20
CoreX 5 Elite: choose storage that fits your system
The CoreX 5 Elite stores 5.12kWh in a wall-mounted enclosure, helping keep floor space clear. Both use 51.2V 100Ah EVE LiFePO4 cells, BMS protection and local or wireless monitoring for compatible 48V-class systems.

Capacity, charging and load support
The manual specifies 50A standard charge/discharge, 95A maximum charging and 100A maximum discharge at the stated test conditions. Its default active current limiter reduces charging to 20A when current reaches 90A. The 95A maximum applies with that limiter disabled in an approved setup; 96A triggers over-current protection. Use the supplied revision and installer-approved profile.
Installation and temperature limits
The wall-mounted enclosure measures 560 × 480 × 137mm (22.05 × 18.9 × 5.39in), with net weight approximately 48kg ±2kg (105.8lb). The package includes a wall bracket, expansion bolts and rubber feet. It is IP20 for an indoor or manufacturer-specified sheltered installation, not an exposed outdoor battery.
Charging is specified at 4–55°C and discharge at −20–55°C, with a recommended use range of 10–45°C. No integrated heater is verified. The low discharge limit does not allow charging below the stated 4°C minimum.


Expansion and inverter communication
SunGoldPower supports up to 15 matching CoreX modules in parallel, totaling 76.8kWh nominal. Confirm the exact inverter, firmware, communication profile and cable pinout. The supplied straight-through communication cables may need a model-specific pinout; a familiar inverter brand alone is not proof of compatibility.
What’s included
One battery with the following manufacturer-listed contents.
- 1 × CoreX 5 Elite wall-mounted 5.12kWh battery
- 1 × Wall-mounted bracket
- 4 × Expansion bolts
- 4 × Rubber feet with bolts
- 1 × White U-shaped metal edge protection strip — 0.6m
- 1 × Positive output power cable
- 1 × Negative output power cable
- 1 × Positive parallel power cable
- 1 × Negative parallel power cable
- 1 × Pack-to-inverter communication cable
- 1 × Pack parallel communication cable
- 1 × User manual and factory product documents
The Package Includes tab shows the exact quantities for the selected option. Factory test report, product certificate and manual are listed as documents in the packing list; the cabinet and inverter are separate.
Compare SunGoldPower battery options
SG48100M wall battery · SGH48100T heated rack battery · Powerwall X 10.24kWh · PowerMax 314 Outdoor · CoreX 5 Pro rack battery · CoreX 5 Elite wall battery.
Browse SunGoldPower batteries, 48V-class lithium storage and SunGoldPower inverters. Select the exact supported battery and inverter configuration before ordering.
Documents, warranty and model details
The manufacturer states 5,000 cycles at 100% depth of discharge to 80% retained capacity and a 10-year warranty. Cycle life describes test performance, not a guaranteed number of years. Current manual and datasheet are attached; an exact-model independent certification document was not found in the manufacturer downloads.
CoreX 5 Elite user manual (PDF) · CoreX 5 Elite specification sheet (PDF)
10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms. 5,000 cycles at 100% DoD to 80% remaining capacity per manufacturer.
| Battery Chemistry | LiFePO4 (LFP) |
|---|---|
| Rated Voltage | 51.2 V nominal; 48V-class system |
| Warranty | 10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms |
| Inverter Compatibility | Confirm exact inverter model, firmware, communication protocol and cable pinout; matching nominal voltage alone is insufficient |
| Connection Method | Manufacturer-approved parallel arrangement; do not wire these storage modules in series |
| Configuration | 1P16S; EVE cells |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| Voltage Range | 43.2–56.8 V |
| Standard Charge / Discharge Current | 50 A at 25°C ±2°C |
| Maximum Charge Current | 95 A (0.95C), with active current limiting disabled under approved setup; 96 A triggers over-current protection |
| Active Charging Current Limit | Enabled by default: charge current at or above 90 A triggers a 20 A limit; this is not the maximum charge rating |
| Maximum Discharge Current | 100 A at 25°C ±2°C |
| Parallel Expansion | Up to 15 matching modules; 76.8 kWh nominal, subject to inverter and system design |
| Cycle Life | 5,000 cycles at 100% DoD to 80% remaining capacity per manufacturer |
| Charge Temperature Range | 4–55°C (39.2–131°F) |
| Discharge Temperature Range | −20–55°C (−4–131°F) |
| Recommended Use Temperature | 10–45°C (50–113°F) |
| Operating Humidity | 5–85% RH, non-condensing |
| Storage Humidity | Below 60% RH, non-condensing |
| Storage Temperature | Up to 1 month: −20–45°C; up to 1 year: 0–35°C |
| Ingress Protection | IP20; indoor or manufacturer-specified professional rain shelter |
| Maximum Application Altitude | 3,000 m (9,842.5 ft) |
| Communication | CAN / RS485 for inverter; RS232 service interface; Wi-Fi / Bluetooth monitoring |
| BMS Protections | Cell balancing; voltage, current, short-circuit and temperature protection |
| Model / SKU | CoreX 5 Elite |
| Product Type | Wall-mounted storage battery |
| Dimensions | 560 × 480 × 137 mm (22.05 × 18.9 × 5.39 in) |
| Weight | 48 kg ±2 kg (approximately 105.8 lb) |
| Included Components (Per Module) | 1 × CoreX 5 Elite wall-mounted 5.12kWh battery; 1 × Wall-mounted bracket; 4 × Expansion bolts; 4 × Rubber feet with bolts; 1 × White U-shaped metal edge protection strip — 0.6m; 1 × Positive output power cable; 1 × Negative output power cable; 1 × Positive parallel power cable; 1 × Negative parallel power cable; 1 × Pack-to-inverter communication cable; 1 × Pack parallel communication cable; 1 × User manual and factory product documents |
| Selected SKU | CoreX 5 Elite |
| Selected Battery Quantity | 1 |
| Selected Nominal Energy | 5.12 kWh |
| Selected Parallel Capacity | 100 Ah at 51.2 V nominal |
| Selected Package Contents | 1 × CoreX 5 Elite wall-mounted 5.12kWh battery; 1 × Wall-mounted bracket; 4 × Expansion bolts; 4 × Rubber feet with bolts; 1 × White U-shaped metal edge protection strip — 0.6m; 1 × Positive output power cable; 1 × Negative output power cable; 1 × Positive parallel power cable; 1 × Negative parallel power cable; 1 × Pack-to-inverter communication cable; 1 × Pack parallel communication cable; 1 × User manual and factory product documents |
| Selected variant SKU | CoreX 5 Elite |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Battery Chemistry | LiFePO4 (LFP) |
|---|---|
| Rated Voltage | 51.2 V nominal; 48V-class system |
| Warranty | 10-year manufacturer warranty; installation, use and exclusions subject to manufacturer terms |
| Inverter Compatibility | Confirm exact inverter model, firmware, communication protocol and cable pinout; matching nominal voltage alone is insufficient |
| Connection Method | Manufacturer-approved parallel arrangement; do not wire these storage modules in series |
| Configuration | 1P16S; EVE cells |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 5.12 kWh |
| Voltage Range | 43.2–56.8 V |
| Standard Charge / Discharge Current | 50 A at 25°C ±2°C |
| Maximum Charge Current | 95 A (0.95C), with active current limiting disabled under approved setup; 96 A triggers over-current protection |
| Active Charging Current Limit | Enabled by default: charge current at or above 90 A triggers a 20 A limit; this is not the maximum charge rating |
| Maximum Discharge Current | 100 A at 25°C ±2°C |
| Parallel Expansion | Up to 15 matching modules; 76.8 kWh nominal, subject to inverter and system design |
| Cycle Life | 5,000 cycles at 100% DoD to 80% remaining capacity per manufacturer |
| Charge Temperature Range | 4–55°C (39.2–131°F) |
| Discharge Temperature Range | −20–55°C (−4–131°F) |
| Recommended Use Temperature | 10–45°C (50–113°F) |
| Operating Humidity | 5–85% RH, non-condensing |
| Storage Humidity | Below 60% RH, non-condensing |
| Storage Temperature | Up to 1 month: −20–45°C; up to 1 year: 0–35°C |
| Ingress Protection | IP20; indoor or manufacturer-specified professional rain shelter |
| Maximum Application Altitude | 3,000 m (9,842.5 ft) |
| Communication | CAN / RS485 for inverter; RS232 service interface; Wi-Fi / Bluetooth monitoring |
| BMS Protections | Cell balancing; voltage, current, short-circuit and temperature protection |
| Model / SKU | CoreX 5 Elite |
| Product Type | Wall-mounted storage battery |
| Dimensions | 560 × 480 × 137 mm (22.05 × 18.9 × 5.39 in) |
| Weight | 48 kg ±2 kg (approximately 105.8 lb) |
| Included Components (Per Module) | 1 × CoreX 5 Elite wall-mounted 5.12kWh battery; 1 × Wall-mounted bracket; 4 × Expansion bolts; 4 × Rubber feet with bolts; 1 × White U-shaped metal edge protection strip — 0.6m; 1 × Positive output power cable; 1 × Negative output power cable; 1 × Positive parallel power cable; 1 × Negative parallel power cable; 1 × Pack-to-inverter communication cable; 1 × Pack parallel communication cable; 1 × User manual and factory product documents |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


