1 / 1
Jackery Explorer 1000 v2 + SolarSaga 200W Solar Generator Jackery Explorer 1000 v2 + SolarSaga 200W Solar Generator
SKU: 60-0820-USB1D1-B
JACKERY SOLAR GENERATOR · 60-0820-USB1D1-B
Jackery Explorer 1000 v2 + SolarSaga 200W Solar Generator
This package combines a 1,070Wh LiFePO4 portable power station with one 200W folding solar panel. The station supplies up to 1,500W continuous AC power to compatible loads; the panel recharges its battery in sunlight. Keep stored energy, output power and solar charging rate separate when planning your setup.
Battery capacity
Continuous AC output
Included solar panel
Station weight
What's in this configuration
One Explorer 1000 v2 station, one SolarSaga 200W folding panel, an AC charging cable and the included manufacturer manuals. Jackery lists a multifunctional solar charging cable and DC8020-to-DC7909 adapter with its SolarSaga 200W panel.
Solar and wall charging
Jackery estimates about 7.5 hours to recharge this station with one SolarSaga 200W in its test conditions. Real time varies with sunlight, panel angle, shade, temperature and any loads running during charging. The station supports up to 400W total across two DC8020 inputs, but this package contains one 200W panel. Additional panels are separate purchases and must follow the model's voltage, current and wiring rules.
Jackery lists about 1.7 hours for normal AC charging. Solar charging and wall charging are different rates; a fast-charge promotion does not describe what one included panel can deliver.
Is this the right size?
This is a useful middle size when a measured camping, RV or outage load fits 1,500W continuous AC and the planned runtime fits a 1,070Wh battery. The single included panel is for charging; it does not turn the station into a 200W AC unit.
The US station has three AC outlets, two USB-C ports, one USB-A port and a 12V car outlet. Measure the running watts and startup demand of what you plan to connect, then estimate energy use over the hours you need. The panel's nameplate rating is not a guarantee of real-time input.
Use the power planner for a load estimate, the backup sizing guide to compare station classes, and the charging guide before choosing a solar setup.
Using your Explorer 1000 v2 solar package
Check the supplied SolarSaga revision
The attached JS200E panel guide is a reference for that revision. Jackery has used different specifications for panels sold under the same SolarSaga 200W name. Match the panel label before relying on dimensions, weather ratings or cable arrangements. This package does not promise the newer revision solely because that guide is available.
Explorer 1000 v2 solar input and panel choices
The Explorer 1000 v2 has two DC8020 inputs connected in parallel: 16–60V, up to 10.5A / 200W per port and 21A / 400W combined. Use matching panel models and equal panel counts across the two inputs. The manual supports one or two SolarSaga 100W/200W panels directly; four matching 100W panels need two separate SolarSaga adapters. Three panels and mixed 100W/200W inputs are not supported.
AC and solar charging can be used together. Solar and vehicle charging cannot be combined. For the supported connection arrangements, see the Explorer 1000 v2 solar-panel compatibility guide.
Small loads, backup switching and expansion
Energy Saving Mode is on by default. After 12 hours at low load, the manual describes output shutoff at thresholds of 25W or less on AC and 2W or less on USB or the car outlet. Disable it for continuous small loads by holding the AC and Main Power buttons until its icon disappears, then test your setup.
There is no expansion-battery connection or two-station parallel mode. UPS switching is within 20ms, not interruption-free; test sensitive equipment. Use the power planner with your actual appliance consumption instead of assuming a guaranteed runtime.
US station manual and panel references
| Model / SKU | 60-0820-USB1D1-B |
|---|---|
| Product Model | Explorer 1000 v2 / JE-1000D; US 120V model |
| Battery Capacity | 1,070Wh; 30.4Ah at 35.2V DC |
| Battery Chemistry | LiFePO4 |
| AC Output | 3 × 120V, 60Hz pure sine wave outlets; 1,500W continuous total shared across the outlets |
| Surge Output | 3,000W brief surge peak; not continuous output |
| AC Bypass Output | 100–120V, 60Hz; 1,500W maximum while connected to wall power |
| USB-C Outputs | 1 × 100W and 1 × 30W maximum; output only, not station charging inputs |
| USB-C 100W Profiles | 5/9/12/15V at 3A; 20V at 5A |
| USB-C 30W Profiles | 5/9V at 3A; 12V at 2.5A; 15V at 2A; 20V at 1.5A |
| USB-A Output | 1 × 18W maximum; 5–6V at 3A, 6–9V at 2A, 9–12V at 1.5A |
| Car Outlet | 12V DC, 10A maximum output |
| AC Charging Input | 100–120V AC, 60Hz, 15A maximum; normal input 1,000W ±50W per Jackery support |
| Solar Input | 2 × DC8020 in parallel; 16–60V, 10.5A / 200W per port; 21A / 400W combined maximum |
| Solar Panel Arrangement | Matching models and counts on both inputs; one or two 100W/200W panels directly; four matching 100W panels require two separate SolarSaga adapters |
| Vehicle Charging Input | 12–16V DC, 8A maximum total; 12V vehicle charging with a separate cable |
| Simultaneous Charging | AC + solar supported; solar + vehicle charging not supported |
| Normal AC Recharge Time | Approximately 1.7 hours; starting charge, temperature, loads and mode affect time |
| Emergency Charging Mode | US manual describes an app setting; current US support table disagrees. Confirm unit/app revision; normal recharge estimate used for planning |
| Solar Recharge Estimates | One 100W: about 15h; two 100W: 8h; four 100W: 4h; one 200W: 7.5h; two 200W: 3.8h under manufacturer test conditions |
| Vehicle Recharge Estimate | Approximately 12 hours with ordinary vehicle charging; about 3 hours with a compatible separate car fast charger per Jackery support |
| UPS Transfer Time | Within 20ms; not zero-interruption power; test equipment compatibility |
| Battery Expansion | Not supported; fixed 1,070Wh battery |
| Two-Station Parallel Operation | Not supported |
| Energy Saving Mode | Enabled by default; 12-hour low-load shutoff at ≤25W AC or ≤2W USB/car; can be disabled |
| Default Standby | 2 hours without charging or discharging; adjustable in Jackery app |
| App Connectivity | Jackery app via Wi-Fi / Bluetooth |
| Quiet Charging Mode | Reduces charging power and speed to reduce noise |
| Battery Saving Mode | Limits available battery capacity to support battery longevity |
| Standby Power Consumption | 18W per Jackery support; actual runtime also depends on connected loads and losses |
| Station Dimensions | 12.87 × 8.82 × 9.72 in / 327 × 224 × 247mm |
| Station Weight | Approximately 23.8 lb / 10.8kg; excludes panels and accessories |
| Housing Material | High-strength PC + ABS plastic |
| Cycle Life | 4,000 cycles to at least 70% capacity |
| Charging Temperature | 32–113°F / 0–45°C |
| Discharging Temperature | 14–113°F / −10–45°C |
| Station Weather Protection | Not waterproof or dustproof; keep dry and ventilated |
| Station Warranty | 3-year standard warranty; 2-year extension subject to Jackery registration and eligibility terms |
| Included Components | 1 × Explorer 1000 v2 station, 1 × SolarSaga 200W folding panel, 1 × AC charging cable and manufacturer manuals. Jackery lists a multifunctional solar cable and DC8020-to-DC7909 adapter with the panel; confirm the supplied panel revision. |
| Package Configuration | Station + one 200W panel |
| Included Solar Power | 1 × 200W SolarSaga panel; nameplate rating, not constant charging power |
| Panel Revision Reference | JS200E manual values below are reference specifications, not confirmation of the supplied stock revision. Verify the panel label before using revision-specific ratings or dimensions. |
| JS200E Reference — STC Electrical Ratings | 200W ±5%; 18V Vmp, 11.5A Imp, 22V Voc |
| JS200E Reference — Folded Dimensions | 600 × 597 × 40mm |
| JS200E Reference — Unfolded Dimensions | 2,279 × 597 × 25mm |
| JS200E Reference — Panel Weight | 6.5kg ±0.3kg |
| JS200E Reference — Panel Weather Protection | IP68; −20–65°C; does not apply to the station |
| Selected variant SKU | 60-0820-USB1D1-B |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.