1 / 2
SKU: 60-300020-US00021
Jackery solar generator package
This exact package pairs a 3,072Wh LiFePO4 JE-3000B power station with two SolarSaga 200W folding panels. Its 3,600W continuous AC output and 7,200W surge rating describe what the station can run; the included panels provide 400W combined nameplate power for recharging. Solar charging speed depends on sun, panel position and loads running at the same time.
Package SKU: 60-300020-US00021. Use the supplied matching solar charging leads; additional multi-panel connectors are for larger supported arrays, not the included arrangement.
The station has five 120V AC outlets: four 20A outlets and one 30A outlet. Total continuous AC output is 3,600W; 7,200W is the momentary surge figure, not a continuous rating. Add your devices' running and startup watts before choosing a package.
The two included panels are rated 200W each under standard test conditions, for 400W combined nameplate power. Jackery estimates about 11 hours to charge with two SolarSaga 200W panels under its test conditions. The station accepts 16–60V solar input, up to 500W per DC input and 1,000W across both inputs. Panel wattage, charging limit and AC output are different measurements.
For home backup, list the loads you actually need and their startup power. The station's outlets can power compatible plugged-in devices; connecting hardwired circuits requires suitable transfer equipment and a qualified installation. Allow for inverter losses, battery reserve, weather and simultaneous loads when estimating runtime.
Use our backup power sizing guide to estimate capacity and output for your loads. The solar generator charging guide explains why a solar charge estimate depends on more than panel wattage.
Compare the station-only listing with this configuration to check what the selected package includes.
Jackery HomePower 3000 Portable Power Station – 3072Wh | 3600W
The 3,600W rating is total AC output on battery power, not a rating for every socket. The standard 120V outlets have a 20A rating; the TT-30 RV outlet is 120V/30A. With AC wall charging and loads running in bypass, the limit is 12A—1,440W at 120V. This is not a 240V or split-phase station.
For planning, divide 3,072Wh by your average load in watts to get a loss-free ceiling, then allow for inverter losses, standby consumption, battery reserve and temperature. For example, a steady 300W load gives 10.2 hours before any losses; actual runtime is shorter. A refrigerator cycles, so measured watt-hours are more useful than its label watts alone.
Battery expansion and parallel station operation are not supported. Choose the HomePower 3600 Plus instead if its documented Battery Pack 3600 expansion path fits your needs; compare its separate weight, capacity and charging limits.
SKU 60-300020-US00021 is sold as Explorer 3000 v2 with two SolarSaga 200W panels. Jackery’s current HomePower 3000 two-panel package uses a different SKU, 60-300020-US00080. Match the product name and SKU when comparing offers; the package here includes 400W of solar nameplate power, not the station’s 1,000W input ceiling.
The two DC8020 solar inputs are parallel-connected internally. Use matching panel models and equal panel counts on both inputs. Jackery supports one, two or four matching panels; a three-panel or mixed-wattage arrangement is not supported. Two panels connect one per input with their supplied charging leads; a four-panel setup requires the specified Jackery connectors. Solar and AC wall charging can operate together; solar and car charging cannot.
Jackery’s US Explorer 3000 v2 support table estimates about 11 hours with two SolarSaga 200W panels. This is a manufacturer test reference, not a promise for a particular day: sun, shade, angle, temperature and running loads change the result.
SolarSaga 200 has multiple hardware revisions. The JS-200E guide linked here is a revision reference: its USB sockets are on the multifunctional cable adapter, and its voltage, weight and folded dimensions apply only to a panel labelled JS-200E. Use the model label on your supplied panels before choosing replacement leads or calculating an expanded array.
Jackery’s US support table lists approximately 2.5 hours for AC recharging. Quiet Charging Mode reduces charging power and takes longer. UPS switchover is within 20ms, not uninterrupted 0ms operation; test the connected device and keep bypass loads within 1,440W.
Energy Saving Mode can turn the outputs off after 12 hours with no load or very low loads. Check the setting in the Jackery app before relying on a small overnight load. Wi-Fi setup requires a 2.4GHz network; 5GHz is not supported.
HomePower 3000 station · HomePower 3000 + SolarSaga 500 X
See the HomePower 3000 collection and estimate your loads with the power planner. Read Jackery’s US model-specific support information.
The documentation tab retains the HomePower 3000 guide as a clearly labelled related-model reference. For this Explorer package, use the Explorer US support link above and the manual supplied with your unit; do not substitute regional 230V specifications.
| Product | Explorer 3000 v2 |
|---|---|
| Package SKU | 60-300020-US00021 |
| Product type | Solar generator package |
| Battery capacity | 3,072Wh (51.2V, 60Ah) |
| Battery chemistry | LiFePO4 |
| Cycle life | 4,000 cycles to at least 70% remaining capacity |
| Continuous AC output | 3,600W total, 120V / 60Hz, pure sine wave |
| Surge output | 7,200W peak; not continuous |
| Standard AC outlets | 4 × 120V / 20A outlets; respect the 3,600W total station limit |
| RV AC outlet | 1 × TT-30, 120V / 30A, up to 3,600W within the station total |
| AC bypass limit | 12A maximum; 1,440W at 120V while wall charging and powering loads |
| UPS transfer time | Within 20ms; not a 0ms UPS |
| USB-C outputs | 2 × 100W maximum each; 5/9/12/15V at 3A, 20V at 5A; output only |
| USB-A outputs | 2 × 18W maximum each; 5–6V at 3A, 6–9V at 2A, 9–12V at 1.5A |
| Car socket output | 12V / 10A, 120W maximum |
| AC charging input | 100–120V AC, 60Hz, 15A maximum; US support lists 1,720W ±50W |
| Solar input | 16–60V operating range; 12A / 500W maximum per port; 24A / 1,000W combined |
| DC input connectors | 2 × DC8020; internally parallel |
| Solar array matching | Same model and equal panel count on both inputs; one, two or four matching panels supported; no three-panel or mixed-wattage setup |
| Vehicle charging | 12V vehicle supply only; 8A maximum total; car charging cable sold separately |
| Simultaneous input sources | AC wall + solar supported; solar + car and two car inputs not supported |
| AC recharge reference | Approximately 2.5 hours per US manufacturer support; conditions and charging settings affect time |
| Vehicle recharge reference | Approximately 36 hours from a 12V car socket; approximately 5.6 hours with the compatible fast car charger under manufacturer conditions |
| Battery expansion | Not supported |
| Parallel station operation | Not supported |
| Station dimensions | 16.4 × 12.8 × 12.0 in (41.6 × 32.5 × 30.5 cm) |
| Station weight | Approximately 59.5 lb (27 kg) |
| Housing | High-strength PC + ABS plastic |
| Charging temperature | 32°F to 113°F (0°C to 45°C) |
| Discharging temperature | 5°F to 113°F (−15°C to 45°C) |
| Standby consumption reference | 22W listed by Jackery US support; allow for standby consumption when estimating runtime |
| Station weather protection | No waterproof or dustproof rating stated by Jackery support; keep dry |
| Wireless control | Jackery app via Bluetooth / 2.4GHz Wi-Fi; 5GHz Wi-Fi not supported |
| Station warranty | 3-year standard warranty plus 2-year extension subject to Jackery registration and eligibility terms |
| Station model | JE-3000B |
| Low-load shutdown | Energy Saving Mode can turn off outputs after 12 hours; check app settings for small continuous loads |
| Included solar | 2 × 200W STC panels; 400W combined nameplate power |
| Solar recharge reference | Approximately 11 hours with two SolarSaga 200W panels under Jackery test conditions; actual time varies |
| SolarSaga 200 revision reference | The following JS-200E values apply only if the supplied panel is labelled JS-200E; confirm the model before using revision-specific ratings |
| JS-200E reference — Pmax | 200W ±5% STC per panel; 225W ±5% under BNPI bifacial test conditions |
| JS-200E reference — Voc / Isc | 22V ±5% / 12.5A ±5% STC |
| JS-200E reference — Vmp / Imp | 18V ±5% / 11.5A ±5% STC |
| JS-200E reference — size | 2,279 × 597 × 25mm unfolded; 600 × 597 × 40mm folded |
| JS-200E reference — weight | 6.5kg ±0.3kg per panel |
| JS-200E reference — panel protection | IP68; −20°C to 65°C operating range; does not apply to the station |
| JS-200E reference — adapter USB | Multifunctional cable adapter: USB-A 5V/2.4A and USB-C 5V/3A; not station port ratings |
| Package contents | 1 × Explorer 3000 v2, 2 × SolarSaga 200W panels with matching charging leads, 1 × AC charging cable, user documentation |
| Selected variant SKU | 60-300020-US00021 |
Clear answers to common questions about this product, setup, compatibility, and use.
