1 / 4
Jackery HomePower 3600 Plus + 2 x SolarSaga 200W Solar Panel Jackery HomePower 3600 Plus + 2 x SolarSaga 200W Solar Panel
SKU: 60-360020-US00119
Jackery HomePower 3600 Plus + Two SolarSaga 200W Panels
The Jackery HomePower 3600 Plus is built as a practical home backup solar generator / portable power station for essential appliances, outage protection, RV power, and expandable energy storage. It combines a large 3,584Wh battery, strong 3,600W output, quiet indoor operation, fast UPS response, solar charging support, and modular expansion for longer backup coverage.
The Home Generator for Everyday Backup Power
The HomePower 3600 Plus is made for homes that need dependable backup power without the complexity, fuel, noise, or installation demands of a traditional gas generator. It is designed to keep essential devices and appliances running through power interruptions while still remaining portable enough to move where power is needed.
Essential Home Backup Power
Instead of overbuilding a full whole-home system, the HomePower 3600 Plus focuses on flexible backup for the appliances and devices most people actually need during an outage. It can support everyday essentials, comfort devices, kitchen appliances, entertainment, and selected high-output appliances within its rated output.
Basic Home Protection
Supports essential loads like refrigeration, lighting, fans, routers, and day-to-day backup needs.
Multiple Appliance Support
Useful for items such as microwaves, coffee makers, TVs, window AC units, and other compatible devices.
Higher-Output Loads
With the right setup, the system can support heavier household needs while staying within rated limits.
Choose the Setup That Fits the Outage
This page breaks down backup planning by outage length and home load type. A single unit is built for essential 120V backup, two units can increase output capability, and expansion battery packs extend runtime for longer outages.
Backup Runtime Planning
This page includes runtime visuals to help customers understand how the system can support a household during different outage scenarios. Use these visuals as a reference; actual runtime changes with appliance demand and usage.
Seamless in Every Way
The HomePower 3600 Plus is designed for quiet, automatic, indoor-friendly backup. Quiet Mode keeps operation low-noise, while UPS functionality helps keep selected electronics running when the grid drops.
Ultra-Quiet Power
Quiet Mode operation makes the system practical for bedrooms, offices, living rooms, and overnight backup.
Fast UPS Protection
The UPS feature helps protect important connected devices by switching quickly during a power interruption.
View additional quiet power and UPS images
Long-Life Battery Protection
Jackery positions the HomePower 3600 Plus as a long-service backup system with battery-level protection, ChargeShield 2.0, and BMS-level safety management. This makes it suitable for customers who want a backup unit they can keep ready for repeated outage use over time.
Power That Grows With You
This page highlights two major upgrade paths: pairing with the SolarSaga 500 X for faster solar charging, and adding modular expansion packs to increase total backup capacity up to 21kWh.
SolarSaga 500 X Ready · Optional Upgrade
Compatible solar charging helps extend backup coverage during daytime outages and off-grid use.
Bifacial Solar Design
The SolarSaga 500 X panel design supports efficient solar collection and secure outdoor placement.
6 Ways to Recharge the HomePower 3600 Plus
The HomePower 3600 Plus supports several recharge paths for home, vehicle, solar, hybrid, and generator-supported use cases.
Easy Setup, Endless Power
This page emphasizes a no-installation, plug-and-play experience for standby backup use. Customers can plug in the unit, connect essentials, monitor power from the app, and use the available ports for multiple devices at once.
No Installation Required
For standby use, charge it, place it where needed, and plug in essential devices.
Manual Transfer Switch Compatible
For home circuit backup, connect through a compatible manual transfer switch according to local electrical code.
Upgrade to Solar Power
Compared with gas generators, the solar generator setup is positioned as cleaner, quieter, easier to operate, and smarter to monitor. Solar charging also gives customers a way to top up power during long outages without relying only on wall charging.
Noise, runtime, and charging estimates vary by setup, load, battery level, charging method, and real-world conditions.
Product Details
This page includes front, side, solar panel, and battery pack diagrams so customers can quickly understand the main controls, outlets, ports, handle, wheels, charging inputs, and expansion connections.
Front Controls & Outputs
Main power button, LCD display, USB outputs, AC outputs, NEMA TT-30 outlet, and AC power controls.
Side Ports & Mobility
Expansion ports, reset button, wheels, retractable handle, DC input, and AC input.
SolarSaga 200W
Two SolarSaga 200W panels are included in this package, providing 400W combined nameplate solar power.
SolarSaga 500 X
Optional solar upgrade, sold separately. The SolarSaga 500 X is not included in this two-200W-panel package.
Battery Pack 3600
Optional expansion battery, sold separately. This package includes the station’s built-in battery, not a Battery Pack 3600.
Plan your power needs
Use our backup power sizing guide to estimate capacity and output for your loads. The solar generator charging guide explains why a solar charge estimate depends on more than panel wattage.
Compare a related option
Compare the station-only listing with this configuration to check what the selected package includes.
Practical details for Station + two 200W panels
Choose this package for a 3,584Wh HomePower 3600 Plus and two SolarSaga 200W panels. The panels total 400W nameplate power; they recharge the battery in suitable sunlight without changing its 3,600W AC output or stored capacity.
What’s included
1 × HomePower 3600 Plus, 1 × AC charging cable and station user manual; 2 × SolarSaga 200W panels with their supplied solar connection cables and panel guides.
Check the output while wall charging
A single station supplies up to 3,600W from its battery, shared across the AC outlets. While connected to wall power in bypass mode, the manual limits AC output to 1,440W (120V, 12A). The TT-30 outlet is 120V; neither a transfer switch nor an expansion battery turns one station into a 240V source.
Keep small loads running
Energy Saving Mode is enabled by default and can switch outputs off after 12 hours below the manual’s 25W AC or 2W USB thresholds. Disable it when continuous low-load power is needed, and test the intended devices. The US JHP-3600A manual states transfer within 10ms; Jackery’s current US support page states within 20ms. Confirm the supplied revision and test the intended equipment. Neither means zero-interruption power. The manual limits AC bypass to 1,440W while wall charging.
Use the supported two-panel setup
Connect one matching SolarSaga 200W panel to each DC8020 input using the supplied panel cables, following the station manual. The ports are connected in parallel and require matching models and panel counts. The current JS200E panel guide is attached; confirm the supplied panel label before using revision-specific dimensions or electrical ratings.
Manuals and package comparisons
Station manual · Solar panel guide
Compare all HomePower 3600 Plus packages or estimate your needs with the power planner.
| Model / SKU | 60-360020-US00119 |
|---|---|
| Station model | HomePower 3600 Plus / JHP-3600A |
| Station Battery Capacity | 3,584Wh; 80Ah at 44.8V DC |
| Battery Chemistry | LiFePO4 |
| Single-Station AC Output | 120V, 60Hz pure sine wave; 3,600W continuous total shared across all five outlets |
| Single-Station Surge Output | 7,200W brief surge peak |
| Standard AC Outlets | 4 × 120V AC; 20A / 2,400W maximum per outlet, subject to 3,600W total shared output |
| RV Outlet | 1 × NEMA TT-30, 120V / 30A / 3,600W maximum; shares the station total |
| AC Bypass Output | 120V, 60Hz, 12A / 1,440W maximum while wall charging; lower than battery-mode output |
| USB-C Outputs | 2 × 100W maximum; 5/9/12/15V at 3A or 20V at 5A; output only |
| USB-A Outputs | 2 × 18W maximum; 5–6V at 3A, 6–9V at 2A or 9–12V at 1.5A |
| AC Charging Input | 100–120V AC, 60Hz, 15A maximum; Jackery support lists 1,720W ±50W maximum |
| Solar Input | 2 × DC8020 ports in parallel; 16–60V and 12A per port, 24A / 1,000W combined maximum |
| Solar Panel Matching | Match panel model and number on both inputs; 1 or 2 panels use included cables, supported 4-panel arrangement needs 2 SolarSaga adapters |
| Vehicle Charging Input | 12–16V DC, 8A maximum total; 12V vehicle only; separate cable required |
| Simultaneous AC and Solar Charging | Supported for a single station; not AC charging during two-station parallel operation |
| Solar and Vehicle Charging Together | Not supported; the parallel DC inputs must have matching voltage |
| AC Recharge Time | Approximately 2.5 hours for the base station per Jackery support; extra batteries, loads and settings change recharge time |
| UPS Transfer Time | US JHP-3600A manual: within 10ms; current US support: within 20ms. Confirm supplied revision; not a zero-interruption UPS |
| Energy Saving Mode | Enabled by default; 12-hour low-load shutoff below the manual thresholds of 25W AC or 2W USB; can be disabled |
| Default Standby | 2 hours with no charging or discharging; configurable in Jackery app |
| Battery Expansion | Up to 5 × Battery Pack 3600 per station; 21,504Wh nominal total including the base station |
| Two-Station Operation | Requires 2 HomePower 3600 Plus units and Jackery Connector; up to 7,200W combined at 120/240V; solar charging only while paralleled |
| App Connectivity | Wi-Fi / Bluetooth; 2.4GHz Wi-Fi, not 5GHz |
| Battery Saving Mode | Capacity-limiting mode in the app; unavailable when expansion batteries are connected per station manual |
| Quiet Charging Mode | Reduces charging power and speed to reduce noise |
| Station Dimensions | 15.2 × 12.2 × 19.3 in / 38.5 × 30.9 × 49.1cm |
| Station Weight | Approximately 77.16 lb / 35kg; excludes panels, batteries and accessories |
| Portability | Built-in wheels and retractable handle |
| Cycle Life | 6,000 cycles to at least 70% capacity |
| Charging Temperature | −4–113°F / −20–45°C |
| Discharging Temperature | −4–113°F / −20–45°C |
| Station Weather Protection | Not waterproof or dustproof; keep dry and maintain ventilation |
| Station Warranty | 3-year standard warranty; 2-year extension subject to Jackery registration and eligibility terms |
| Included Solar Panels | 2 × SolarSaga 200W; 400W combined STC nameplate rating |
| Panel Revision Reference | Current linked JS200E manual; verify the supplied panel label before using revision-specific electrical or dimensional values |
| Current JS200E Panel Ratings | 200W ±5% per panel; 18V Vmp, 11.5A Imp, 22V Voc |
| Current JS200E Folded Dimensions | 600 × 597 × 40mm per panel |
| Current JS200E Unfolded Dimensions | 2,279 × 597 × 25mm per panel |
| Current JS200E Panel Weight | 6.5kg ±0.3kg each; approximately 13kg for the pair before accessories |
| Current JS200E Panel Protection | IP68; −20–65°C; panel rating does not make the station waterproof |
| Included Components | 1 × HomePower 3600 Plus, 1 × AC charging cable and station user manual; 2 × SolarSaga 200W panels with their supplied solar connection cables and panel guides |
| Package Configuration | Station + two 200W panels |
| Selected variant SKU | 60-360020-US00119 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.