Jackery SolarSaga 200W Solar Panel | IP68 Waterproof Jackery SolarSaga 200W Solar Panel | IP68 Waterproof
SKU: 21-0002-000063
- Solar class 200W folding panel
- Electrical reference JS-200E: 22V Voc; verify revision
- Included equipment 3m cable, adapter and manual
Jackery Solar Panel
Jackery SolarSaga 200W Solar Panel · IP68 Waterproof
The Jackery SolarSaga 200W is a four-fold portable panel with a 200W nameplate rating, DC8020 connection and IP68 panel protection. Jackery has sold JS-200D and JS-200E hardware revisions with different electrical values, dimensions and weight. Check the model printed on your panel before matching it to a station or building a multi-panel array.
Why choose the SolarSaga 200W?
Choose it when a folding panel is more useful than a permanently mounted module. Its 200W rating is a laboratory test result; actual charging depends on sunlight and the connected station’s input limits.
- Four-fold design with rear support feet and a 9.8 ft (3 m) lead.
- The JS-200D and JS-200E revisions do not share one universal Voc or Vmp; use the revision-specific specification rows below.
- The panel is IP68 rated; keep live connectors and the station charging port protected from water.
Best-fit use cases
Useful for portable solar charging during camping, RV travel and backup preparation when the receiving station accepts the actual panel revision’s open-circuit voltage, current and connector. Check the full series or parallel array against the station limits before ordering additional panels.
What to check before buying
Confirm the actual JS-200D or JS-200E model on the panel label, then match its voltage, current, connector and all-panel wiring to the station’s solar input. Do not infer hardware revision from the retail SKU alone.
Compare panel options
Our solar panel selection guide explains panel selection for different setups. The bifacial panel guide compares the relevant panel format; check this product’s electrical ratings before pairing it with other equipment.
Compare another option
Compare the Jackery SolarSaga 100W Air Solar Panel for a different mounting style or output. Check each panel’s connector, electrical ratings and station input before choosing.
Explorer 1000 v2 solar setup
Pairing this panel with Explorer 1000 v2? Read the model-specific solar connection guide for the station’s two-port input limits and supported matching-panel arrangement.
SolarSaga 200W: more solar input in a folding panel
Choose the 200W SolarSaga when you have room to unfold a larger panel and your station can accept its electrical output. It supplies solar energy; a power station stores that energy and powers AC appliances. A 200W panel does not turn a small station into a 200W-larger inverter.
200W and 225W describe different test conditions
Jackery’s currently linked JS-200E manual lists 200W under Standard Test Conditions (STC) and 225W under Bifacial Nameplate Irradiance (BNPI), which adds controlled rear illumination. Neither is a guaranteed outdoor charging rate. The same manual lists 22V open-circuit voltage and 11.5A operating current under STC. Earlier JS-200D panels have a different table; the label on the supplied panel governs.
Included cable and direct USB charging
The manufacturer’s retail list includes the panel, a 3m multifunctional solar charging cable, a DC8020-to-DC7909 adapter and the user manual. The JS-200E cable’s adapter has USB-A at 5V/2.4A and USB-C at 5V/3A. These are small-device outputs, not 100W USB-C laptop charging. Jackery specifies this cable for JS-200E; do not assume another panel’s similar-looking lead is interchangeable.
Portable setup, not permanent roof mounting
Unfold the rear supports on a stable surface and use the sun-angle indicator to aim the panel. The manual says this folding panel is not for fixed installation. For an RV roof or other planned mounted position, compare the SolarSaga 100 Prime. For a smaller folding option, compare the 100 Air.
When using more than one panel, follow the exact station and connector manuals for panel count and wiring. Use matching panel models on a connector; an adapter changes the plug, not the permitted voltage. Browse all Jackery solar panels or use the power planner to estimate daily energy needs before choosing array size.
| Retail SKU | 21-0002-000063 |
|---|---|
| Product type | Portable four-fold bifacial solar panel |
| Revision identification | JS-200E is the current linked manufacturer guide; JS-200D is an earlier revision. Supplied revision must be checked on the label |
| Nominal panel class | 200W |
| JS-200E STC maximum power | 200W ±5% |
| JS-200E BNPI maximum power | 225W ±5% |
| JS-200E STC open-circuit voltage (Voc) | 22V ±5% |
| JS-200E STC short-circuit current (Isc) | 12.5A ±5% |
| JS-200E STC operating voltage (Vmp) | 18V ±5% |
| JS-200E STC operating current (Imp) | 11.5A ±5% |
| JS-200E BNPI open-circuit voltage | 22V ±5% |
| JS-200E BNPI short-circuit current | 13.5A ±5% |
| JS-200E BNPI operating voltage | 18V ±5% |
| JS-200E BNPI operating current | 12.6A ±5% |
| Earlier JS-200D reference Voc | 25V ±5%; not the JS-200E value |
| Earlier JS-200D reference Vmp | 20.2V ±5%; not the JS-200E value |
| JS-200E maximum system voltage | 60V; receiver input limits still apply |
| JS-200E maximum reverse current | 15A |
| Electrical protection class | Class II |
| Panel ingress rating | IP68; keep connectors and receiver dry |
| Operating temperature | -20°C to 65°C / -4°F to 149°F, current JS-200E manual |
| JS-200E unfolded dimensions | 2279 × 597 × 25mm / 89.76 × 23.50 × 0.98in |
| JS-200E folded dimensions | 600 × 597 × 40mm / 23.62 × 23.50 × 1.57in |
| JS-200E panel weight | 6.5kg ±0.3kg / 14.33lb ±0.66lb |
| Station-side connector | DC8020; DC8020-to-DC7909 adapter included per retail package list |
| Included cable length | 3m / approximately 9.8ft |
| JS-200E cable adapter USB-A output | 5V / 2.4A |
| JS-200E cable adapter USB-C output | 5V / 3A |
| Deployment | Rear supports and sun-angle indicator; not for permanent installation |
| Warranty | 3-year limited warranty; eligible 2-year extension requires Jackery registration or support activation |
| Solar energy storage | None; power station or battery system sold separately |
| Output conditions | Nameplate ratings are laboratory results; sunlight, shade, temperature and receiver limits affect actual charging |
| Selected variant SKU | 21-0002-000063 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


