Renogy 1000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth Renogy 1000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
SKU: RIV1210PU-126-G1-US
- Continuous AC 1000W
- Battery bank 12V
- AC transfer 10A / 20ms
UPS-Ready Inverter Power
1000W 12V Pure Sine Wave Inverter with UPS Transfer Switch and Built-In Bluetooth
Power compatible electronics with clean AC output, automatic transfer support and Bluetooth monitoring in a compact 12V inverter system.
- UPS transfer support for compatible backup-power applications.
- Built-in Bluetooth and remote-control support.
- The A3 manual lists maximum inverter efficiency of 92% and idle consumption below 12W.
- Renogy rates the inverter’s operating noise below 51 dB under its stated test conditions.

Efficient Power Transformation
Convert 12V stored energy into stable AC power for compatible household and mobile electronics.

Support for Inductive Loads
Handle compatible startup-demand appliances with clean inverter output and surge capability.

Stable Operation for Common Appliances
Power everyday compatible appliances with controlled output designed for safe operation.

Cooling and Temperature Management
Cooling support is designed to help maintain dependable inverter performance under load.

Electrical Safety and GFCI Protection
GFCI outlet protection supports safer use of compatible connected devices when the inverter is installed as directed.
Built-In Bluetooth Monitoring
Monitor supported inverter performance through compatible Renogy app connectivity.

Remote Control and UPS Powering
Control supported inverter operation and maintain eligible backup loads when transfer support is needed.

Performance Comparison
Renogy presents output, quiet operation and efficiency-focused design in its product comparison imagery.

Power for Daily Productivity
Use compatible AC power for mobile work and everyday off-grid electrical needs.

Energy for a Garden Shed
Support compatible shed appliances and tools in an off-grid power setup.

Power on the Open Road
Bring clean AC power to suitable RV and travel applications.

One-Stop Renogy System Compatibility
Pair the inverter with compatible Renogy battery and solar components for a complete off-grid system.

Size the inverter
Our RV inverter sizing guide explains continuous watts, startup loads and battery-side demand before choosing an RV inverter.
Renogy 1000W PU: connections, battery demand and box contents
This 1000W pure sine wave inverter supplies 120V AC from a 12V battery bank and switches connected loads to a valid AC input when available. The 10A transfer switch does not charge the battery. Built-in Bluetooth and a wired remote are included.
Choose the battery bank and operating mode
Renogy publishes 105A maximum continuous battery-side current for this model. Battery BMS limits, connections, conductors and protection must support the intended load. A larger amp-hour number does not necessarily mean a battery supports that discharge current.
The A3 manual specifies 20ms transfer in either direction. This is a short interruption, not zero-interruption backup. The 10A bypass rating and 1000W continuous inverter rating describe different operating modes. All two sockets and the hardwired output share the inverter’s continuous limit. The A3 port table rates each receptacle at up to 10A, subject to the shared output limit.
Bluetooth provides nearby app monitoring without a separate Bluetooth module. A remote internet connection needs additional compatible equipment. Solar charging requires a separate controller; panels do not connect directly to this inverter.
What’s in the box
- 1 × Renogy 1000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
- 1 × Renogy PU 1000W inverter user manual
- 1 × Renogy PU 1000W wired remote control
- 1 × RJ12 remote-control cable — 5 m (16.4 ft)
- 2 × 4 AWG battery cable — 3 ft
The supplied battery cables are 3 ft long. Longer runs require fresh conductor and protection sizing. Installation-specific fuses, disconnects and mounting hardware are separate.
Compare the right inverter function
Compare the Renogy 2000W PU, browse Renogy inverters, and use our RV inverter sizing guide to check running watts, startup demand and battery discharge limits.
| Renogy 1000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth — specifications | |
| Selected variant SKU | RIV1210PU-126-G1-US |
|---|---|
| Model | RIV1210PU-126 |
| Output Waveform | Pure Sine Wave |
| AC Terminals | 2 x AC Sockets + Terminal Block |
| DC Terminals | M8-25 |
| Operating Temperature | -4°F to 113°F / -20°C to 45°C |
| Storage Temperature | -40°F to 158°F / -40°C to 70°C |
| Humidity | Max 95%, Non-Condensing |
| Cooling | Thermally Controlled Fans |
| Enclosure Rating | IP20; dry protected installation |
| Dimensions (L x W x H) | 15.3 x 8.1 x 3.8 in / 388.5 x 205.4 x 95.3mm |
| Weight | 8.2 lbs / 3.7kg |
| Continuous Output Power | 1,000W |
| Continuous Output Current | 8.3A AC |
| Total Harmonic Distortion (THD) | <3% (A3 manual) |
| Power Factor | 1 |
| Surge Rating | 2,000W @ 2s |
| Output Voltage | 120V AC ± 3% |
| Output Frequency | 50/60Hz |
| Rated Battery Input Voltage | 12VDC |
| Battery Input Voltage Range | 11 to 15.5VDC |
| Maximum Continuous Battery Input Current | 105A |
| Inverter Efficiency | 92% maximum (A3 manual) |
| Full Load Efficiency | 87% (A3 manual) |
| Power Consumption | <12W |
| Battery Overvoltage Shutdown | 16.0VDC ± 0.3VDC |
| Battery Low Voltage Alarm | 11.0VDC ± 0.3VDC |
| Battery Low Voltage Shutdown | 10.5VDC ± 0.3VDC |
| Transfer Switch Rating | 10A |
| Front Plate Dimensions | 2.8 x 4.3 x 1.3 in / 70 x 110 x 31.8 mm |
| Wired Length | 16.40ft |
| UL458, FCC Part 15 Class B | Yes |
| Material and Workmanship Warranty | 1 year (Renogy limited warranty A7) |
| AC Battery Charging | Not supported; separate battery charger required |
| Direct Solar Input | None; separate solar charge controller required |
| Specification Reference | US PU family A3 manual (June 30, 2025) |
| AC Transfer Time | 20ms in either direction |
| Rated AC Input Voltage Range | 90V to 140V AC |
| Bluetooth | Built in; nearby app connection |
| AC Receptacle Limit | 10A per receptacle (A3 port table); all outputs share 1000W continuous inverter rating |
| Included Battery Cables | Two 4 AWG cables, 3 ft each |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


