Renogy ShadowFlux 120W N-Type Anti-Shading Solar Panel - 2 Panels Renogy ShadowFlux 120W N-Type Anti-Shading Solar Panel
SKU: RSP120DC-ASRx2-US
- Per-panel power 120W
- Open-circuit voltage 33.7V
- Panel dimensions 41.42 × 22.76 in
ShadowFlux anti-shading rigid solar panel
Renogy ShadowFlux 120W N-Type Solar Panel
A compact rigid panel for RV, vehicle, boat, and off-grid solar installations where partial shade may limit output. Choose a one-, two-, or four-panel pack. All electrical ratings and dimensions below are per panel.
How ShadowFlux helps in partial shade
Renogy's ShadowFlux cell-level design is intended to reduce power loss when part of the panel is shaded. It does not eliminate shade losses; output depends on the shade pattern, sunlight, temperature, and installation. The 120W rating is measured under standard test conditions.
Check the electrical fit before connecting
Each 120W panel is rated at 33.7V open-circuit voltage (Voc), 4.57A short-circuit current (Isc), 28.9V operating voltage (Vmp), and 4.21A operating current (Imp). Compare the planned array's resulting voltage and current with your charge controller's limits. Series and parallel wiring change the array totals; wattage alone does not establish compatibility.
Plan the mounting space
Each panel measures 41.42 × 22.76 × 1.18 inches. Renogy’s sheet lists 6.81kg and 15.87 lb, an inconsistent conversion; confirm the actual weight before a weight-critical installation. Use the selected pack quantity when planning roof area, mounting hardware, cable routing, and handling. This is a rigid panel, not a foldable portable panel.
Choose the panel quantity
The one-panel option includes one 120W panel; the two-panel and four-panel options contain two and four of the same 120W panel, respectively. Confirm your controller input limits and mounting layout for the quantity and wiring you choose. Promotional accessories are not assumed to be included.
For the full per-panel electrical, mechanical, and operating limits, see the Renogy ShadowFlux 120W/200W specification sheet and user manual in the product documents below. View Renogy's product information.
Compare panel options
Our solar panel selection guide explains how to compare panel ratings and installation needs; check this product’s electrical ratings before pairing it with other equipment.
Choose your Renogy 120W ShadowFlux configuration
Compare this 120W rigid panel when partial shade and a 41.42 × 22.76-inch footprint matter. ShadowFlux reduces some partial-shading losses; it cannot turn a shaded site into a full-sun installation.
What’s in the box
- 1 panel: 1 × 120W, 120W combined nameplate. SKU RSP120DC-ASR-G1-US.
- 2 panels: 2 × 120W, 240W combined nameplate. SKU RSP120DC-ASRx2-US.
- 4 panels: 4 × 120W, 480W combined nameplate. SKU RSP120DC-ASRx4-US.
Each module includes its attached output leads. These are panel-only packs: the controller, battery, brackets and installation-specific wiring are separate. Package Includes follows the selected option.
Match the complete array to your controller
Per panel: 33.7V Voc, 28.9V Vmp, 4.57A Isc and 4.21A Imp. Series wiring adds voltage; parallel wiring adds current. Allow for cold-weather voltage rise and the receiving equipment’s required margins. A nominal 12V label or matching connector alone does not establish compatibility.
Size the charging system and battery from daily energy needs, local peak-sun-hours and seasonal losses. Nameplate wattage is not a promise of continuous delivered charging power.
Compare before choosing
Compare the 200W ShadowFlux panel, browse Renogy solar panels and check Renogy charge controllers. Match dimensions and electrical limits to your actual installation.
| Maximum System Voltage | 1000V DC |
|---|---|
| Maximum Series Fuse Rating | 15A |
| Model | RSP120DC-ASR |
| Power Per Panel at STC | 120W |
| Open-Circuit Voltage Per Panel (Voc) | 33.7V |
| Optimum Operating Voltage Per Panel (Vmp) | 28.9V |
| Short-Circuit Current Per Panel (Isc) | 4.57A |
| Optimum Operating Current Per Panel (Imp) | 4.21A |
| Dimensions Per Panel | 41.42 × 22.76 × 1.18 in / 1052 × 578 × 30mm |
| Weight Per Panel | Manufacturer lists 6.81kg and 15.87 lb; conversion is inconsistent, exact weight needs confirmation |
| Panel Operating Temperature Range | -40°C to 85°C / -40°F to 185°F |
| Controller and Battery | Separate; match the complete array to the equipment input limits |
| Pack Options | 1 panel / 120W combined nameplate; 2 panels / 240W combined nameplate; 4 panels / 480W combined nameplate |
| Material and Workmanship Warranty | 5 years; manufacturer terms apply |
| Cell Technology | N-Type monocrystalline cells |
| Module Efficiency | 20.7% |
| Number of Cells | 48 (3 × 16) |
| Nominal Operating Cell Temperature (NOCT) | 45 ± 2°C |
| Temperature Coefficient of Pmax | -0.29%/°C |
| Temperature Coefficient of Voc | -0.25%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Output Cables | 14 AWG, 600mm / 23.6 in |
| Junction Box — IP Rating | IP67 |
| Solar Connector — IP Rating | IP68 |
| Connector Rated Current | 30A (component rating, not panel output) |
| Connector Maximum Voltage | 1000V DC (component rating; observe panel/system limits) |
| Connector Temperature Range | -40°C to 90°C (component rating) |
| Frame | Anodized aluminum alloy |
| Front Glass | Tempered glass, 3.2mm |
| Power Output Warranty | 25 years: 95% at 5 years, 90% at 10 years, 80% at 25 years; manufacturer terms apply |
| Panels in Selected Pack | 2 |
| Selected Pack Nameplate Total | 240W (STC; before system losses) |
| Selected Pack SKU | RSP120DC-ASRx2-US |
| Selected variant SKU | RSP120DC-ASRx2-US |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Maximum System Voltage | 1000V DC |
|---|---|
| Maximum Series Fuse Rating | 15A |
| Model | RSP120DC-ASR |
| Power Per Panel at STC | 120W |
| Open-Circuit Voltage Per Panel (Voc) | 33.7V |
| Optimum Operating Voltage Per Panel (Vmp) | 28.9V |
| Short-Circuit Current Per Panel (Isc) | 4.57A |
| Optimum Operating Current Per Panel (Imp) | 4.21A |
| Dimensions Per Panel | 41.42 × 22.76 × 1.18 in / 1052 × 578 × 30mm |
| Weight Per Panel | Manufacturer lists 6.81kg and 15.87 lb; conversion is inconsistent, exact weight needs confirmation |
| Panel Operating Temperature Range | -40°C to 85°C / -40°F to 185°F |
| Controller and Battery | Separate; match the complete array to the equipment input limits |
| Pack Options | 1 panel / 120W combined nameplate; 2 panels / 240W combined nameplate; 4 panels / 480W combined nameplate |
| Material and Workmanship Warranty | 5 years; manufacturer terms apply |
| Cell Technology | N-Type monocrystalline cells |
| Module Efficiency | 20.7% |
| Number of Cells | 48 (3 × 16) |
| Nominal Operating Cell Temperature (NOCT) | 45 ± 2°C |
| Temperature Coefficient of Pmax | -0.29%/°C |
| Temperature Coefficient of Voc | -0.25%/°C |
| Temperature Coefficient of Isc | 0.05%/°C |
| Output Cables | 14 AWG, 600mm / 23.6 in |
| Junction Box — IP Rating | IP67 |
| Solar Connector — IP Rating | IP68 |
| Connector Rated Current | 30A (component rating, not panel output) |
| Connector Maximum Voltage | 1000V DC (component rating; observe panel/system limits) |
| Connector Temperature Range | -40°C to 90°C (component rating) |
| Frame | Anodized aluminum alloy |
| Front Glass | Tempered glass, 3.2mm |
| Power Output Warranty | 25 years: 95% at 5 years, 90% at 10 years, 80% at 25 years; manufacturer terms apply |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


