Renogy 2000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth Renogy 2000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
SKU: RIV1220PU-126-G1-US
- Continuous AC 2000W
- Battery bank 12V
- AC transfer 20A / 20ms
UPS-Ready Inverter Power
2000W 12V Pure Sine Wave Inverter with UPS Transfer Switch and Built-In Bluetooth
Run compatible AC equipment with clean 2000W inverter output, automatic transfer support and connected monitoring for mobile or backup-power systems.
- Built-in Bluetooth and remote-control support.
- UPS transfer capability for compatible essential loads.
- Pure sine wave output for sensitive electronics and household appliances.

Efficient Power Transformation
Deliver stable AC output for compatible household and mobile applications.

Support for Inductive Loads
Handle eligible startup-demand appliances using clean pure sine wave output.

Stable Power for Everyday Appliances
Support common compatible electrical loads with dependable inverter operation.

Cooling and Temperature Management
The cooling system shown in the Description supports stable operation under load.

Electrical Safety and GFCI Protection
Safety-focused outlet protection helps support compatible connected devices.
Built-In Bluetooth Monitoring
Track supported inverter status through compatible Renogy app monitoring.

Remote Control and UPS Powering
Manage supported operation and provide transfer support for eligible backup loads.

Performance Comparison
Use the comparison below to check output, transfer, monitoring, and connection features against your planned loads.
Power for Daily Productivity
Support compatible electronics and tools for daily off-grid use.

Energy for a Garden Shed
Provide compatible AC energy in a compact shed power arrangement.

Power on the Open Road
Bring clean inverter power into suitable RV and travel setups.

One-Stop Renogy System Compatibility
Combine compatible Renogy solar and battery components in a complete energy system.

Off-Grid Application Overview
The application illustration below shows one possible system arrangement; check your battery and wiring limits for your own installation.

Size the inverter
Our RV inverter sizing guide explains continuous watts, startup loads and battery-side demand before choosing an RV inverter.
Renogy 2000W PU: connections, battery demand and box contents
This 2000W pure sine wave inverter supplies 120V AC from a 12V battery bank and switches connected loads to a valid AC input when available. The 20A transfer switch does not charge the battery. Built-in Bluetooth and a wired remote are included.
Choose the battery bank and operating mode
Renogy publishes 210A maximum continuous battery-side current for this model. Battery BMS limits, connections, conductors and protection must support the intended load. A larger amp-hour number does not necessarily mean a battery supports that discharge current.
The A3 manual specifies 20ms transfer in either direction. This is a short interruption, not zero-interruption backup. The 20A bypass rating and 2000W continuous inverter rating describe different operating modes. All two sockets and the hardwired output share the inverter’s continuous limit. The A3 port table rates each receptacle at up to 16A, subject to the shared output limit.
Bluetooth provides nearby app monitoring without a separate Bluetooth module. A remote internet connection needs additional compatible equipment. Solar charging requires a separate controller; panels do not connect directly to this inverter.
What’s in the box
- 1 × Renogy 2000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
- 1 × Renogy PU 2000W inverter user manual
- 1 × Renogy PU 2000W wired remote control
- 1 × RJ12 remote-control cable — 5 m (16.4 ft)
- 2 × 1/0 AWG battery cable — 3 ft
The supplied battery cables are 3 ft long. Longer runs require fresh conductor and protection sizing. Installation-specific fuses, disconnects and mounting hardware are separate.
Compare the right inverter function
Compare the Renogy 3000W PU, browse Renogy inverters, and use our RV inverter sizing guide to check running watts, startup demand and battery discharge limits.
| Renogy 2000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth — specifications | |
| Selected variant SKU | RIV1220PU-126-G1-US |
|---|---|
| Model | RIV1220PU-126 |
| Output Waveform | Pure Sine Wave |
| AC Terminals | 2 x AC Sockets, 1 x AC High-Output Terminal Block |
| DC Terminals | M8 x 25mm |
| Operating Temperature | -4°F to 113°F / -20°C to 45°C |
| Storage Temperature | -40°F to 158°F / -40°C to 70°C |
| Humidity | Max 95%, Non-Condensing |
| Cooling | Fans |
| Dimensions (L x W x H) | 18.3 x 9.9 x 3.8 in / 468.3 x 250.4 x 95.3mm |
| Weight | 12.8 lb / 5.8 kg |
| Continuous Output Power | 2,000W |
| Continuous Output Current | 16.6A AC |
| Total Harmonic Distortion (THD) | <3% (A3 manual) |
| Power Factor | 1 |
| Surge Rating | 4,000W @ 2s |
| Output Voltage | 120V AC ± 3% |
| Output Frequency | 50Hz / 60Hz |
| Rated Battery Input Voltage | 12V DC |
| Battery Input Voltage Range | 11.0V to 15.5V DC |
| Rated AC Input Voltage Range | 90V to 140V AC |
| Maximum Continuous Battery Input Current | 210A |
| Inverter Efficiency | 92% maximum (A3 manual) |
| Full Load Efficiency | 87% (A3 manual) |
| Power Consumption | <18W |
| Battery Overvoltage Shutdown | 16.0V ± 0.3V DC |
| Battery Low Voltage Alarm | 11.0V ± 0.3V DC |
| Battery Low Voltage Shutdown | 10.5V ± 0.3V DC |
| Front Plate Dimensions | 2.8 x 4.3 x 1.3 in / 70 x 110 x 31.8 mm |
| Wired Length | 16.4ft / 5m |
| UL Certified to 458 and CSA 22.2 No. 107.1-01, FCC Part 15 Class B | Yes |
| Transfer Switch Rating | 20A |
| AC Battery Charging | Not supported; separate battery charger required |
| Direct Solar Input | None; separate solar charge controller required |
| Specification Reference | US PU family A3 manual (June 30, 2025) |
| AC Transfer Time | 20ms in either direction |
| Bluetooth | Built in; nearby app connection |
| AC Receptacle Limit | 16A per receptacle (A3 port table); all outputs share 2000W continuous inverter rating |
| Enclosure Rating | IP20; dry protected installation |
| Material and Workmanship Warranty | 1 year (Renogy limited warranty A7) |
| Included Battery Cables | Two 1/0 AWG cables, 3 ft each |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


