1 / 4
Jackery HomePower 1000 v2 Portable Power Station Jackery HomePower 1000 v2 Portable Power Station
SKU: 21-0001-000445
- Included storage 1,024Wh LiFePO4
- AC output 1,500W total; 3,000W surge
- Included hardware Station; panels sold separately
Jackery · Black power station
Keep your everyday essentials within reach.
When the lights go out, you want a simple way to keep the things you rely on running. The black Jackery HomePower 1000 v2 gives you stored battery power for compatible plug-in appliances, work devices, and everyday electronics. Charge it ahead of time, decide which loads matter most, and move it where you need it.
This listing includes the power station and AC charging cable. Add compatible solar panels later, or choose the solar bundle below.
Start with what you want to run.
Make a short list of your essentials: your router and modem, a laptop, lights, or a compatible refrigerator. Check each device’s input rating and add up the loads you expect to use together.
- The combined continuous AC load must stay within 1,500W.
- Motor-driven appliances also need enough startup power; check their surge requirement.
- The three AC outlets share the output limit. They are not three separate 1,500W supplies.
Choose the right size for your day.
This is a 120V portable station for selected appliances. Its battery capacity determines how long a load can run; its output rating determines whether it can power that load in the first place.
High-draw heating and cooking appliances use stored energy quickly. If you want to cover several large loads or a long outage, compare a larger setup before ordering.
What could that battery mean for runtime?
These are planning examples for steady AC loads, using an assumed 85% usable-energy allowance: 1,024Wh × 0.85 ÷ watts. They are calculations, not measured tests or promised appliance runtimes.
Actual runtime depends on conversion losses, the station’s own consumption, temperature, battery condition, and device behavior. Refrigerators cycle on and off, so use measured energy consumption when possible.
Charge before you need it.
Solar charging is available when you add a compatible panel. This station has two DC8020 inputs and supports up to 400W of combined solar input within its voltage and current limits. Start with the exact panel model and connection requirements before choosing cables.
For wall charging, connect the included AC cable to the station and a suitable grounded outlet. Vehicle charging needs a compatible car charging cable, sold separately; follow the manual and avoid draining the vehicle’s starter battery.
The cables to plan for.
The AC charging cable is included. Solar panels and the car charging cable are sold separately. For solar, match the panel cable or adapter to the station’s DC8020 input; a connector that fits does not establish electrical compatibility.
If you expand the solar setup, check the full array against the station’s 16–60V solar input range, current limits, and 400W combined maximum. Follow Jackery’s instructions for matching both input ports. An extension cable and a multi-panel connector perform different jobs.
Choose your configuration.
Want solar charging included from the start? Choose the matching bundle with one SolarSaga 200W panel. Both colors use the same 1,024Wh capacity and 1,500W rated AC output.
Battery backup for a desk or essential device.
The HomePower 1000 v2 supports automatic battery switchover within 10 milliseconds in its UPS mode. It is not a zero-interruption supply: test compatibility with your equipment before relying on it. The manual specifies a separate 12A maximum AC bypass limit while connected to wall power.
Its LiFePO4 battery is rated by Jackery for 6,000 cycles to at least 70% capacity under the manufacturer’s conditions. Keep the station dry, leave room for ventilation, and follow the manual’s operating and storage instructions.
Compare nearby Jackery models
Choose by actual load, energy use, port voltage, and charging plan:
Open the Specifications, Package Includes, and FAQ tabs above for this configuration. Read the Jackery HomePower 1000 v2 manual (PDF, approximately 8.6MB) for operating limits, charging instructions, and warranty terms.
Read our home-backup sizing guide · Compare Jackery power stations
Plan and compare your power setup
Ready to compare options? Compare available power stations and packages by published capacity, output and charging specifications. Check the exact model’s input, output, connector and expansion limits before buying.
HomePower 1000 v2 station — choosing and using this configuration
What this exact package includes
1 × black HomePower 1000 v2 station, 1 × AC charging cable and product documents. Solar panels and expansion batteries are not included.
HomePower 1000 v2 vs Plus v2
Both HomePower 1000 v2 models start with 1,024Wh and accept up to 400W combined solar input. The non-Plus version supplies 1,500W total AC through three outlets and has no battery expansion. Plus v2 supplies 1,800W through four outlets, adds a 140W USB-C port and supports up to five Battery Pack 2000 Plus v2 units.
Compare HomePower 1000 v2 configurations and HomePower 1000 Plus v2 configurations. Explorer 1000 v2 is another model with a 1,070Wh battery; its specifications and accessories should not be substituted for these HomePower models.
Wall-powered backup and low-power devices
The US manual limits wall-powered bypass to 12A, or 1,440W at 120V. The 1,500W battery-output rating is a separate limit. UPS transfer takes up to 10ms and is not a zero-interruption supply.
Energy Saving Mode turns outputs off after 12 hours with no load or low loads below 25W AC or 2W DC/USB. Hold POWER and the AC1 button for more than three seconds to toggle it, or set its duration in the Jackery app. Test your small continuous loads before relying on overnight operation.
Fixed storage or future expansion?
HomePower 1000 v2 has no expansion-battery connection. Choose HomePower 1000 Plus v2 if adding storage later is part of your plan. The finish does not change the electrical ratings within each model.
Solar and USB limits that matter
The two DC8020 inputs accept 16–60V solar, up to 12A per port and 21A / 400W combined. Match the panel model and count on both ports when using them simultaneously. Check the complete array against the voltage and current limits before adding panels.
The 100W USB-C port and 30W USB-C port have different limits. Your device, cable and charging protocol must support the requested power. The station’s USB-C ports are outputs, not a substitute for its AC or DC charging inputs.
Choose the matching configuration
HomePower 1000 v2 + SolarSaga 200W · HomePower 1000 v2 White station · HomePower 1000 Plus v2 station
Use the power planner to estimate energy needs, then compare power stations by output, storage and input limits.
Manufacturer manuals
HomePower 1000 v2 — complete user manual (55 pages) · Jackery app user guide
The complete 55-page manufacturer manual above has the same visible pages as the original, with private editing data removed to reduce download size. Original manufacturer PDF.
| Model / SKU | 21-0001-000445 |
|---|---|
| Station Model | JHP-1000A |
| Station Color | Black |
| Station Battery Capacity | 1,024Wh; 20Ah at 51.2V DC |
| Total Included Storage | 1,024Wh nominal; no expansion pack included |
| Battery Chemistry | LiFePO4 |
| Rated AC Output | 1,500W total shared across all outlets; 120V, 60Hz pure sine wave |
| Surge Output | 3,000W brief peak; not continuous |
| AC Outlets | 3 outlets with shared output limit |
| AC Charging Input | 100–120V AC, 60Hz, 15A maximum |
| Wall-Powered Bypass | 100–120V AC, 60Hz, 12A maximum; 1,440W at 120V |
| UPS Transfer | Within 10ms; not a 0ms UPS |
| Primary USB-C Output | 100W maximum: 5/9/12/15V at 3A; 20V at 5A |
| Secondary USB-C Output | 30W maximum: 5/9V at 3A; 12V at 2.5A; 15V at 2A; 20V at 1.5A |
| USB-A Output | 18W maximum: 5–6V at 3A; 6–9V at 2A; 9–12V at 1.5A |
| DC Output | 12V, 10A maximum |
| Solar Input | 2 × DC8020; 16–60V, 12A per port, 21A / 400W maximum combined |
| Vehicle Charging Input | 11–16V DC, 8A maximum combined; suitable 12V vehicle supply and separately sold charging cable |
| Solar Pairing | Match the model and number of panels across both inputs; verify complete array voltage and current |
| Battery Expansion | Not supported |
| Station Weight | About 23.4 lb / 10.6kg |
| Station Dimensions | 12.4 × 7.9 × 9.2 in / 31.4 × 20.1 × 23.4cm |
| Cycle Life | 6,000 cycles to at least 70% remaining capacity |
| Charging Temperature | 14–113°F / −10–45°C |
| Discharging Temperature | 14–113°F / −10–45°C |
| Energy Saving Mode | Default output shutdown after 12h at no load or below 25W AC / 2W DC-USB; adjustable in app |
| App Connection | Bluetooth and 2.4GHz Wi-Fi; 5GHz Wi-Fi not supported |
| Station Warranty | 3-year standard warranty plus 2-year extension subject to manufacturer activation and eligibility |
| Station Weather Protection | Keep station dry and ventilated; panel IP rating does not apply to station |
| What’s Included | 1 × black HomePower 1000 v2 station, 1 × AC charging cable and product documents. Solar panels and expansion batteries are not included. |
| Selected variant SKU | 21-0001-000445 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.