1 / 1
Jackery Explorer 2000 v2 + SolarSaga 200W Solar Generator Jackery Explorer 2000 v2 + SolarSaga 200W Solar Generator
SKU: 60-200020-US00082
JACKERY SOLAR GENERATOR · 60-200020-US00082
Jackery Explorer 2000 v2 + SolarSaga 200W Solar Generator
This package combines a 2,042Wh LiFePO4 portable power station with one 200W folding solar panel. The station supplies up to 2,200W continuous AC power to compatible loads; the panel recharges its battery in sunlight. Keep stored energy, output power and solar charging rate separate when planning your setup.
Battery capacity
Continuous AC output
Included solar panel
Station weight
What's in this configuration
One Explorer 2000 v2 station, one SolarSaga 200W folding panel and one AC charging cable. Jackery lists a multifunctional charging cable, DC8020-to-DC7909 adapter and manual with its SolarSaga 200W panel.
Solar and wall charging
Jackery estimates about 15 hours to recharge this station with one SolarSaga 200W in its test conditions. Real time varies with sunlight, panel angle, shade, temperature and any loads running during charging. The station supports up to 400W total across two DC8020 inputs, but this package contains one 200W panel. Additional panels are separate purchases and must follow the model's voltage, current and wiring rules.
Jackery lists about 2 hours for normal AC charging. Solar charging and wall charging are different rates; a fast-charge promotion does not describe what one included panel can deliver.
Is this the right size?
This larger station serves a different load plan from the 600 v2 or 1000 v2: 2,200W continuous AC allows more simultaneous running power, while 2,042Wh is the starting point for runtime. One 200W panel is included; it is not a fast 400W solar array.
The US station has three 120V AC outlets, two USB-C ports, one USB-A port and a 12V car outlet. Measure the running watts and startup demand of what you plan to connect, then estimate energy use over the hours you need. The panel's nameplate rating is not a guarantee of real-time input.
Already have a suitable panel? Compare the station-only listing. Use the power planner for a load estimate, the backup sizing guide to compare station classes, and the charging guide before choosing a solar setup.
Compare Explorer 2000 v2 packages
The Explorer 2000 v2 has 2,042Wh of battery storage and 2,200W continuous AC output. Choosing more panels changes the included solar equipment, not the battery capacity. Its maximum solar input is 400W, so a panel’s nameplate rating is not a promised charging rate.
Explorer 2000 v2 station
Base station with its listed charging accessories.
Station + two 100W Air panels
Two lighter-format Air panels; 200W combined nameplate rating.
Station + two 200W panels
Two SolarSaga 200W panels; 400W combined nameplate rating.
Open each listing for its current price, availability and full box contents.
Make one SolarSaga 200W panel work for your load plan
One panel now, a matched second panel later
This package includes 1 SolarSaga 200W panel, for 200W combined nameplate power. One input is limited to 200W under Jackery’s published support specifications. Adding a matching second panel can use the second input and the 400W combined ceiling. Real input varies with sun, shade, temperature and simultaneous loads.
Panel revision and carrying size
The current JS-200E manual lists each panel at 600 × 597 × 40mm folded, 2279 × 597 × 25mm unfolded and 6.5kg ±0.3kg. Its STC ratings are 200W, 18V operating voltage and 22V open-circuit voltage. These are current JS-200E reference specifications; confirm the supplied panel label if exact dimensions or electrical ratings are critical. Earlier SolarSaga 200W specifications differ.
Plan for low-load shutoff
Energy Saving Mode is enabled by default. The manual lists automatic output shutoff after 12 hours at low loads: 25W or less on AC, or 2W or less on USB/car output. A small router or intermittent load can fall below these thresholds. Disable that mode when continuous low-load output is needed, and allow for standby consumption.
Check the charging-mode output limit
Battery operation supports 2,200W continuous AC. Wall-powered bypass has a separate 12A limit; Jackery describes a 1,500W peak in UPS mode before an outage. The 2,200W battery-output rating returns after the outage. UPS transfer is within 20ms, so it is not zero-interruption power for sensitive equipment.
Fixed capacity, with several ways to recharge
The Explorer 2000 v2 does not accept an expansion battery. Solar panels and the carrying bag change the package equipment, not its 2,042Wh battery. Normal AC recharging is approximately two hours; Jackery advertises approximately 1.7 hours in Emergency Super Charge mode. Sunlight, temperature and active loads affect solar charging.
Jackery supports simultaneous wall and solar charging, but not solar and vehicle charging together. The two solar inputs are connected in parallel: use matching panel models and an equal panel count on each input. Keep the station dry even when the connected panels have an IP68 rating.
What’s included
1 × Explorer 2000 v2; AC charging cable and station manual; 1 × SolarSaga 200W with its multifunctional charging cable, DC8020-to-DC7909 adapter and panel manual.
Read the US JE-2000D station manual and SolarSaga 200W guide. Compare station only with all Explorer 2000 v2 configurations, then use the power planner for your actual loads.
| Station model | Jackery Explorer 2000 v2 / JE-2000D |
|---|---|
| Model / SKU | 60-200020-US00082 |
| Battery Capacity | 2,042Wh; 44.8V DC, 45.6Ah |
| Battery Chemistry | LiFePO4 |
| AC Output Waveform | Pure sine wave |
| AC Output | 3 × 120V AC outlets, 60Hz; 2,200W continuous total shared across all outlets |
| Surge Output | 4,400W brief surge peak |
| USB-A Output | 1 × 18W maximum; 5–6V/3A, 6–9V/2A, 9–12V/1.5A |
| USB-C Outputs | 1 × 100W maximum and 1 × 30W maximum; outputs, not charging inputs |
| Car Output | 12V DC, 10A maximum |
| AC Charging Input | 100–120V AC, 60Hz, 15A maximum; manufacturer support lists 1,800W ±50W maximum |
| AC Bypass Input / Output | 100–120V AC, 60Hz, 12A maximum; manual describes 1,500W UPS peak, below battery-mode 2,200W rating |
| Solar Input | 16–60V DC; 12A and 200W maximum using one port, 21A and 400W maximum using both per Jackery support |
| DC Input Ports | 2 × DC8020 inputs connected in parallel; match panel model and panel count across ports |
| Solar Panel Configuration | 1 or 2 panels with included cables; supported 4-panel arrangement requires 2 SolarSaga adapters; all panels must match |
| Vehicle Charging Input | 11–16V DC, 8A maximum; do not combine vehicle and solar charging |
| AC Recharge Time | Approximately 2 hours normal AC; approximately 1.7 hours in Emergency Super Charge mode per Jackery; conditions affect time |
| Vehicle Recharge Time | Approximately 24 hours; manufacturer estimates about 5.6 hours with compatible car fast charger |
| UPS Transfer Time | Within 20ms; not a zero-interruption UPS |
| Standby Power Consumption | 18W per Jackery support; include standby and conversion losses in runtime planning |
| Energy Saving Mode | Enabled by default; 12-hour low-load shutoff at AC ≤25W or USB/car ≤2W; can be disabled |
| Battery Expansion | Not supported; fixed 2,042Wh nominal capacity |
| App Control | Jackery app supported; Wi-Fi / Bluetooth |
| Simultaneous AC and Solar Charging | Supported per Jackery; do not add the separate maximum input ratings into a promised combined rate |
| Dimensions | 13.2 × 10.4 × 11.5 in / 33.5 × 26.4 × 29.2cm; station only |
| Weight | Approximately 39.5 lb / 17.9kg; station only |
| Housing Material | PC and ABS high-strength plastic |
| Cycle Life | 4,000 cycles to at least 70% capacity |
| Charge Temperature Range | 32–113°F / 0–45°C |
| Discharge Temperature Range | 14–113°F / −10–45°C |
| Station Weather Protection | No waterproof or dustproof rating per Jackery support; keep station dry |
| Station Warranty | 3-year standard warranty; 2-year extension subject to Jackery eligibility and registration terms |
| Included Solar Panels | 1 × SolarSaga 200W |
| Combined Panel Nameplate Power | 200W at STC |
| Panel Reference Revision | Current manufacturer guide covers JS-200E; supplied panel revision must be checked before exact-fit or array planning |
| Panel STC Reference | JS-200E: 200W ±5%, 18V Vmp ±5%, 11.5A Imp ±5%, 22V Voc ±5% |
| Panel Folded Reference Dimensions | JS-200E: 600 × 597 × 40mm per panel |
| Panel Unfolded Reference Dimensions | JS-200E: 2279 × 597 × 25mm per panel |
| Panel Reference Weight | JS-200E: 6.5kg ±0.3kg per panel |
| Panel Protection | JS-200E: IP68; −4–149°F / −20–65°C; station must remain dry |
| Solar Recharge Estimate | Jackery support estimates approximately 15 hours with 1 SolarSaga 200W panel; not a guaranteed time and subject to supplied panel revision and conditions |
| Included Components | 1 × Explorer 2000 v2; AC charging cable and station manual; 1 × SolarSaga 200W with its multifunctional charging cable, DC8020-to-DC7909 adapter and panel manual |
| Package Configuration | one SolarSaga 200W panel |
| Selected variant SKU | 60-200020-US00082 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.