Renogy 700W 12V Pure Sine Wave Inverter Renogy 700W 12V Pure Sine Wave Inverter
SKU: RNG-INVT-700-12V-P2-G2-US
- Continuous output 700W
- One-second surge 1400W
- Battery system 12V DC
P2 Series Pure Sine Wave
P2 Series 12V Pure Sine Wave Inverter — 700W | Inverter Only
The 700W P2 inverter converts 12V battery power to pure sine wave AC. Renogy rates this model for 700W continuous output and 1400W peak power; this listing is for the inverter-only package.
Renogy 700W P2: match the load, battery and connections
The Renogy 700W 12V pure sine wave inverter supplies 700W continuously, with 1400W surge for one second. Add the appliances that run together and check motor or compressor startup duration separately. The wattage is shared across every AC output.
Check battery current before choosing capacity
At a 12V battery voltage and an assumed 85% conversion efficiency, a 700W AC load draws approximately 69A DC (700 ÷ 12 ÷ 0.85). This is a planning calculation, not a fixed current specification or a fuse recommendation. Voltage sag, startup loads and cable losses can increase demand. Check the battery BMS, terminals, conductors and protection together.
AC output and control
Two AC sockets; a 5V/2.1A USB port; and a wired remote are provided. This P2 has no battery charger, solar charging input, Bluetooth module support or automatic AC transfer function.
US output: the linked A2 manual specifies 115V AC at 60Hz; Renogy’s retail table describes it as 120V. This is not a 230V/240V-output model. Use the supplied unit label and manual when checking equipment and installation limits.
What’s included
- 1 × 700W 12V P2 inverter
- 1 × wired remote control
- 1 × 5 m (16.4 ft) RJ11 remote-control cable
- 1 × user manual
- 2 × 6 AWG battery cables, 3 ft each
The battery bank, battery-side fuse/disconnect and any separate charging or transfer equipment are not part of this inverter-only package. Included cable sizes describe the box contents; longer runs require installation-specific sizing.
Compare the next step
Compare Renogy inverter functions and sizes, then use the RV inverter sizing guide to estimate your load. Related options: Renogy’s 2000W inverter charger · 1000W P2 inverter.
For battery selection, compare Renogy batteries by capacity, discharge limit and cold-weather features. Battery voltage and discharge limits must match the planned load; this is not a blanket compatibility claim.
P2 Series Inverter Overview
Use the 700W continuous rating when adding up appliances that run together, and check startup wattage against the 1400W peak rating.
Unlock the Magic of Pure Sine Wave Power
Convert compatible 12V battery energy into stable AC power for electronics and appliances.
Efficient Inverters for Optimal Performance
Two AC sockets and a 5V/2.1A USB port are listed for this 700W model. Check the battery, wiring and connected load before use.
Pure Sine Wave Protection for Appliances
Clean output helps support sensitive compatible electrical equipment.
Efficient and Stable Power
Renogy lists 115V AC (120V-class US output) at 60Hz and a nominal 12V battery input for this model. Match the output to the connected devices.
Why Appliances Can Trip
Appliance startup demand should be considered when planning a compatible inverter system.
Cooling Fan Design
Cooling airflow supports inverter temperature management during operation.
GFCI and Safety Protection
Safety-focused output protection supports suitable connected equipment.
Proper Chassis Grounding
Follow the Renogy manual for chassis grounding, wiring, ventilation and protective devices.
Customized Solution Suite
Use eligible Renogy system components together in a compatible energy setup.
Enhancing Your Journey
Bring clean AC inverter power to appropriate travel and mobile applications.
The Safe and Comfortable Choice
A correctly sized 12V battery system can supply suitable AC loads in an RV, cabin or other off-grid installation.
Travel Application Visual
Before installation, account for the combined running load and the startup surge of connected appliances.
Mobile Application Visual
Keep the inverter ventilated and within the battery-voltage range specified in its manual.
Essential Inverter for a Smooth Boat Trip
Pure sine wave output supports suitable marine electrical equipment.
Size the inverter
Our RV inverter sizing guide explains continuous watts, startup loads and battery-side demand before choosing an RV inverter.
Compare a related option
Compare continuous output, surge rating and input current before sizing an inverter.
| Renogy 700W P2 US inverter | |
| Selected variant SKU | RNG-INVT-700-12V-P2-G2-US |
|---|---|
| Verified specifications | |
| Continuous Output Power | 700W |
| Peak Power Rating | 1400W for 1 second |
| Output Voltage | 115V AC per A2 manual; 120V-class US retail description |
| Output Frequency | 60Hz |
| AC Output Sockets | 2 |
| USB Power Port | 5V / 2.1A |
| Power Output Control | ON / OFF / REM switch and included wired remote |
| Output Waveform | Pure sine wave |
| Nominal Efficiency | >90% |
| Total Harmonic Distortion (THD) | <3% per A2 manual |
| Nominal Input Battery Voltage | 12V DC |
| Battery Terminal Size | M8 × 1.25 × 15 mm |
| Low Battery Alarm | 11V ± 0.3V DC (A2 manual) |
| Battery Low Shutdown | 10.5V ± 0.3V DC (A2 manual) |
| Over Voltage Shutdown | 16.5V ± 0.3V DC (A2 manual) |
| No Load Current Draw | <0.8A |
| Dimensions | 12.2 × 7.4 × 3.3 in / 310 × 188 × 84 mm |
| Weight | 5.6 lb (A2 manual) |
| Cooling Fan | Thermally controlled |
| Operating Temperature Range | -4°F to 104°F / -20°C to 40°C |
| Cable | 2 × 6 AWG battery cables, 3 ft each |
| Inverter Remote Control | 5 m / 16.4 ft wired RJ11 cable |
| FCC Part 15 Class B | Yes |
| Material and Workmanship Warranty | 1 Year |
| Storage Temperature | -40°F to 158°F / -40°C to 70°C |
| Battery Input Voltage Range | 10V to 16V DC |
| AC Terminal Block | Not present |
| Full Load Efficiency | >85% per A2 manual |
| Humidity | Maximum 93%, non-condensing |
| Safety Standards | ETL listed to UL 458 and CSA C22.2 No. 107.1 per manual introduction |
| Battery Charging | Not built in |
| Solar Input | No direct solar charging input |
| AC Transfer Switch | Not built in |
| Bluetooth | Not supported |
| Specification Source | Linked Renogy P2 A2 US manual; retail revision values may differ |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


