Renogy 3000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth Renogy 3000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
SKU: RIV1230PU-126-G1-US
- Continuous AC 3000W
- Battery bank 12V
- AC transfer 30A / 20ms
3000W PU: choose the function as well as the watts
The PU adds a 30A automatic transfer switch and Bluetooth. AC bypass switches the load source; it does not recharge the battery.
3000W continuous output; 6000W for 2 seconds. A 12V bank must deliver more than 250A at full AC output once conversion losses are included. Check the battery’s current limit and installation requirements before sizing runtime.
Compare P2 · PRO EcoSleep · REGO inverter charger.
3000W 12V Pure Sine Wave Inverter with UPS Transfer Switch
Convert compatible 12V battery power into clean AC output with built-in Bluetooth monitoring and automatic switching between on-grid and off-grid power sources.
Transform Power with Safety, Efficiency and Flexibility
Designed for mobile and backup power systems, the inverter supports automatic power transition, built-in Bluetooth monitoring, quiet operation and pure sine wave output for compatible electronics.
Support Inductive Loads with Proper System Planning
High-starting-current appliances such as refrigerators, washing machines and kettles require a compatible electrical system designed to manage their peak power demand.
Power Everyday Appliances with 3000W Output
Build a compatible system for common travel and backup essentials including laptops, televisions, refrigerators, microwaves, air conditioners, coffee makers and washing machines.
Cooling Temperature Management
Thermally controlled cooling fans move airflow through the inverter to help dissipate heat and support stable operating temperatures under load.
Electrical Safety Protection for Peace of Mind
Integrated protections help safeguard compatible systems against low voltage, high voltage, short circuits and ground-fault conditions.
Instant Device Monitoring
Built-in Bluetooth enables supported real-time monitoring through the compatible DC Home app, helping you track inverter operation from a mobile device.
Easy-to-Use Remote Control
Use the included compatible remote control interface to manage inverter operation from a convenient location inside your installation.
UPS Powering for Seamless Backup Solutions
When connected to shore power in a compatible setup, the inverter transfers in 20ms according to the A3 manual; connected equipment must tolerate that brief interruption.
Performance Advantages
The live Renogy comparison highlights pure sine wave output, built-in Bluetooth, UPS functionality, remote control, GFCI protection, quiet operation and up to 92% inverter efficiency in the A3 manual.
Power for the Open Road
Integrate the inverter into a compatible RV or van electrical system to convert stored battery energy into usable AC power while travelling.
Keep Productivity and Entertainment Flowing
Compatible backup power arrangements can help keep selected electronics running during off-grid stays or temporary power interruptions.
Power an Off-Grid Workspace
Use the inverter in a properly configured battery-powered setup to support selected tools and equipment around a garden shed or remote work area.
Integrate with a Complete Renogy System
Combine compatible solar panels, a charge controller, battery storage and the inverter to create an off-grid power arrangement for AC and DC energy needs.
Size the inverter
Our RV inverter sizing guide explains continuous watts, startup loads and battery-side demand before choosing an RV inverter.
Renogy 3000W PU: connections, battery demand and box contents
This 3000W pure sine wave inverter supplies 120V AC from a 12V battery bank and switches connected loads to a valid AC input when available. The 30A transfer switch does not charge the battery. Built-in Bluetooth and a wired remote are included.
Choose the battery bank and operating mode
Renogy publishes 310A maximum continuous battery-side current for this model. Battery BMS limits, connections, conductors and protection must support the intended load. A larger amp-hour number does not necessarily mean a battery supports that discharge current.
The A3 manual specifies 20ms transfer in either direction. This is a short interruption, not zero-interruption backup. The 30A bypass rating and 3000W continuous inverter rating describe different operating modes. All three sockets and the hardwired output share the inverter’s continuous limit. The A3 port table rates each receptacle at up to 16A, subject to the shared output limit.
Bluetooth provides nearby app monitoring without a separate Bluetooth module. A remote internet connection needs additional compatible equipment. Solar charging requires a separate controller; panels do not connect directly to this inverter.
What’s in the box
- 1 × Renogy 3000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth
- 1 × Renogy PU 3000W inverter user manual
- 1 × Renogy PU 3000W wired remote control
- 1 × RJ12 remote-control cable — 5 m (16.4 ft)
Battery cables are not included with this 3000W model. External fusing, disconnects and installation-specific conductors are separate.
Compare the right inverter function
Compare the Renogy 3000W PRO EcoSleep, browse Renogy inverters, and use our RV inverter sizing guide to check running watts, startup demand and battery discharge limits.
| Renogy 3000W 12V Pure Sine Wave Inverter w/ UPS Transfer Switch and Built-In Bluetooth — specifications | |
| Selected variant SKU | RIV1230PU-126-G1-US |
|---|---|
| AC Terminals | 3 x AC Sockets + Terminal Block |
| DC Terminals | M8-25 |
| Operating Temperature | -4°F to 113°F / -20°C to 45°C |
| Storage Temperature | -40°F to 158°F / -40°C to 70°C |
| Humidity | Max 95%, Non-Condensing |
| Cooling | Thermally Controlled Fans |
| Enclosure Rating | IP20; dry protected installation |
| Dimensions (L x W x H) | 19.2 x 10.4 x 3.8 in / 488.8 x 263.4 x 95.3mm |
| Weight | 14.8 lbs / 6.7kg |
| Continuous Output Power | 3,000W |
| Continuous Output Current | 25A AC |
| Total Harmonic Distortion (THD) | <3% (A3 manual) |
| Power Factor | 1 |
| Surge Rating | 6,000W @ 2s |
| Output Voltage | 120V AC ± 3% |
| Output Frequency | 50/60Hz |
| Rated Battery Input Voltage | 12VDC |
| Battery Input Voltage Range | 11 to 15.5VDC |
| Maximum Continuous Battery Input Current | 310A |
| Inverter Efficiency | 92% maximum (A3 manual) |
| Full Load Efficiency | 87% (A3 manual) |
| Power Consumption | <18W |
| Battery Overvoltage Shutdown | 16.0VDC ± 0.3VDC |
| Battery Low Voltage Alarm | 11.0VDC ± 0.3VDC |
| Battery Low Voltage Shutdown | 10.5VDC ± 0.3VDC |
| Transfer Switch Rating | 30A |
| Front Plate Dimensions | 2.8 x 4.3 x 1.3 in / 70 x 110 x 31.8 mm |
| Wired Length | 16.40ft |
| UL458, FCC Part 15 Class B | Yes |
| Material and Workmanship Warranty | 1 year (Renogy limited warranty A7) |
| Output Waveform | Pure Sine Wave |
| AC Battery Charging | Not supported; separate battery charger required |
| Direct Solar Input | None; separate solar charge controller required |
| Specification Reference | US PU family A3 manual (June 30, 2025) |
| AC Transfer Time | 20ms in either direction |
| Rated AC Input Voltage Range | 90V to 140V AC |
| Bluetooth | Built in; nearby app connection |
| AC Receptacle Limit | 16A per receptacle (A3 port table); all outputs share 3000W continuous inverter rating |
| Included Battery Cables | Not included |
| Model | RIV1230PU-126 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


