1 / 1
Jackery Explorer 1000 V2 Portable Power Station - 1070Wh Capacity | 1500W Jackery Explorer 1000 V2 Portable Power Station - 1070Wh Capacity | 1500W
SKU: 21-0001-000292
Jackery Portable Power Station
Jackery Explorer 1000 V2 Portable Power Station - 1070Wh Capacity · 1500W
Explorer 1000 v2 is a 1,070Wh LiFePO4 power station with 1,500W continuous 120V AC output and a 3,000W surge rating. At about 23.8 lb, it suits portable plug-in power where a compact 1kWh-class station meets the load.
The facts that matter
- A 1,070Wh battery sets the approximate energy budget; 1,500W is the combined continuous rating of its three AC outlets.
- Its 3,000W surge rating addresses brief startup demands, not sustained 3,000W appliance operation.
- Two DC8020 solar inputs support up to 400W combined, within the listed 16–60V range.
- The LiFePO4 battery is rated for 4,000 cycles to at least 70% capacity, and the unit weighs approximately 23.8 lb.
Where this model fits
Choose it for camping, RV plug-in loads, or outage essentials that fit a 1,500W continuous limit. Compare expected watt-hours for the actual devices rather than treating the 1,070Wh battery as a promised number of runtime hours.
Check before you buy
Check the running and startup watts of the devices you will power, the 120V outlet requirement, and solar array voltage before buying. The standalone station includes an AC charging cable; panels are separate.
Compare the right Jackery size
Choosing by wattage alone can miss the battery size, outlet and solar-input differences. Compare these nearby models against your actual loads:
Plan your power needs
Use our backup power sizing guide to estimate capacity and output for your loads. The solar generator charging guide explains why a solar charge estimate depends on more than panel wattage.
Plan and compare your power setup
Estimate your appliance energy and backup time in our Power Planner. Then compare available power stations and packages by published capacity, output and charging specifications. Check the exact model’s input, output, connector and expansion limits before buying.
Choosing your Explorer 1000 v2 setup
The Jackery E1000 v2 is the Explorer 1000 v2 station described here. Choose this listing when you need the station alone or already own a verified compatible solar setup. The battery is fixed at 1,070Wh; adding solar charging does not add stored capacity or raise its 1,500W AC output.
What’s included
1 × Explorer 1000 v2 station, 1 × AC charging cable and station user manual. Solar panels and vehicle charging cable are separate.
Explorer 1000 v2 solar input and panel choices
The Explorer 1000 v2 has two DC8020 inputs connected in parallel: 16–60V, up to 10.5A / 200W per port and 21A / 400W combined. Use matching panel models and equal panel counts across the two inputs. The manual supports one or two SolarSaga 100W/200W panels directly; four matching 100W panels need two separate SolarSaga adapters. Three panels and mixed 100W/200W inputs are not supported.
AC and solar charging can be used together. Solar and vehicle charging cannot be combined. For the supported connection arrangements, see the Explorer 1000 v2 solar-panel compatibility guide.
Small loads, backup switching and expansion
Energy Saving Mode is on by default. After 12 hours at low load, the manual describes output shutoff at thresholds of 25W or less on AC and 2W or less on USB or the car outlet. Disable it for continuous small loads by holding the AC and Main Power buttons until its icon disappears, then test your setup.
There is no expansion-battery connection or two-station parallel mode. UPS switching is within 20ms, not interruption-free; test sensitive equipment. Use the power planner with your actual appliance consumption instead of assuming a guaranteed runtime.
Compare the Explorer 1000 v2 packages
Dune White station · Station + one 100W panel · Station + one 200W panel
See the Explorer 1000 v2 station and solar-kit comparison for the four configurations. Panel wattage changes the charging setup; it does not change the station’s battery capacity or AC output.
US station manual and panel references
| Model / SKU | 21-0001-000292 |
|---|---|
| Product Model | Explorer 1000 v2 / JE-1000D; US 120V model |
| Battery Capacity | 1,070Wh; 30.4Ah at 35.2V DC |
| Battery Chemistry | LiFePO4 |
| AC Output | 3 × 120V, 60Hz pure sine wave outlets; 1,500W continuous total shared across the outlets |
| Surge Output | 3,000W brief surge peak; not continuous output |
| AC Bypass Output | 100–120V, 60Hz; 1,500W maximum while connected to wall power |
| USB-C Outputs | 1 × 100W and 1 × 30W maximum; output only, not station charging inputs |
| USB-C 100W Profiles | 5/9/12/15V at 3A; 20V at 5A |
| USB-C 30W Profiles | 5/9V at 3A; 12V at 2.5A; 15V at 2A; 20V at 1.5A |
| USB-A Output | 1 × 18W maximum; 5–6V at 3A, 6–9V at 2A, 9–12V at 1.5A |
| Car Outlet | 12V DC, 10A maximum output |
| AC Charging Input | 100–120V AC, 60Hz, 15A maximum; normal input 1,000W ±50W per Jackery support |
| Solar Input | 2 × DC8020 in parallel; 16–60V, 10.5A / 200W per port; 21A / 400W combined maximum |
| Solar Panel Arrangement | Matching models and counts on both inputs; one or two 100W/200W panels directly; four matching 100W panels require two separate SolarSaga adapters |
| Vehicle Charging Input | 12–16V DC, 8A maximum total; 12V vehicle charging with a separate cable |
| Simultaneous Charging | AC + solar supported; solar + vehicle charging not supported |
| Normal AC Recharge Time | Approximately 1.7 hours; starting charge, temperature, loads and mode affect time |
| Emergency Charging Mode | US manual describes an app setting; current US support table disagrees. Confirm unit/app revision; normal recharge estimate used for planning |
| Solar Recharge Estimates | One 100W: about 15h; two 100W: 8h; four 100W: 4h; one 200W: 7.5h; two 200W: 3.8h under manufacturer test conditions |
| Vehicle Recharge Estimate | Approximately 12 hours with ordinary vehicle charging; about 3 hours with a compatible separate car fast charger per Jackery support |
| UPS Transfer Time | Within 20ms; not zero-interruption power; test equipment compatibility |
| Battery Expansion | Not supported; fixed 1,070Wh battery |
| Two-Station Parallel Operation | Not supported |
| Energy Saving Mode | Enabled by default; 12-hour low-load shutoff at ≤25W AC or ≤2W USB/car; can be disabled |
| Default Standby | 2 hours without charging or discharging; adjustable in Jackery app |
| App Connectivity | Jackery app via Wi-Fi / Bluetooth |
| Quiet Charging Mode | Reduces charging power and speed to reduce noise |
| Battery Saving Mode | Limits available battery capacity to support battery longevity |
| Standby Power Consumption | 18W per Jackery support; actual runtime also depends on connected loads and losses |
| Station Dimensions | 12.87 × 8.82 × 9.72 in / 327 × 224 × 247mm |
| Station Weight | Approximately 23.8 lb / 10.8kg; excludes panels and accessories |
| Housing Material | High-strength PC + ABS plastic |
| Cycle Life | 4,000 cycles to at least 70% capacity |
| Charging Temperature | 32–113°F / 0–45°C |
| Discharging Temperature | 14–113°F / −10–45°C |
| Station Weather Protection | Not waterproof or dustproof; keep dry and ventilated |
| Station Warranty | 3-year standard warranty; 2-year extension subject to Jackery registration and eligibility terms |
| Included Components | 1 × Explorer 1000 v2 station, 1 × AC charging cable and station user manual. Solar panels and vehicle charging cable are separate. |
| Package Configuration | Station only |
| Selected variant SKU | 21-0001-000292 |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.