Renogy Voyager 20A PWM Solar Charge Controller — 12V/24V IP67 Renogy Voyager 20A PWM Solar Charge Controller — 12V/24V IP67
SKU: RCC20VOYP-G1-US
- Charge current 20A
- Battery system 12V / 24V
- Enclosure IP67
Voyager 20A solar charging: choose by the system
The new-edition RCC20VOYP Voyager 20A combines an IP67 enclosure with a backlit LCD for compatible outdoor solar-battery installations. It supports 12V and 24V banks, but the permitted solar open-circuit voltage changes with the battery system: 25V on 12V, or 55V on 24V.

Outdoor charging with IP67 protection
This Voyager is a common-positive controller. Confirm compatibility with the complete grounding arrangement before replacing another model; it is not automatically interchangeable with the negative-ground Wanderer Li 30A. The IP67 enclosure does not remove the need to protect and correctly install cable connections. No communication port or Bluetooth module connection is provided.
Match the solar array and battery
Solar input limit: 25 V Voc maximum on a 12 V bank; 55 V Voc maximum on a 24 V bank Array guidance: 260 W at 12 V; 520 W at 24 V. Check panel open-circuit voltage at the lowest design temperature and array current before choosing series or parallel connections. PWM charging requires a panel configuration appropriate to the battery voltage; the controller does not offer MPPT voltage conversion.
Set the battery chemistry and charging parameters to the battery manufacturer’s requirements. Automatic 12V/24V recognition applies to supported non-lithium batteries. For lithium, set the required system voltage and charge parameters manually. Temperature compensation and lead-acid equalization must not be treated as universal lithium settings. Battery/BMS cold-charge restrictions still apply.
What’s included
- 1 × Renogy Voyager 20A PWM Waterproof Solar Charge Controller
The RTSVOY temperature sensor is optional. This is the controller-only listing. Solar panels, batteries, site wiring and circuit protection are selected separately.
Monitoring and temperature sensing
Backlit LCD showing charging current, battery voltage and error codes. No communication port; no BT-1 connection. The optional RTSVOY sensor supports battery-temperature measurement; lithium mode excludes temperature compensation.
Compare the right controller
Choose Voyager for its IP67 enclosure and on-device display when the positive-ground design fits the installation. Adventurer offers a flush-mounted interior display, USB and optional BT-1 monitoring, but is IP20. The Wanderer Li 30A is 12V-only and negative-ground.
Compare Renogy Adventurer Li 30A, or browse Renogy charge controllers. For a higher-voltage array, compare the input limits of an appropriate MPPT model rather than assuming a larger PWM amp rating is enough.
Installation fit and documents
6.08 × 3.83 × 1.40 in; 0.55 lb. Terminals accept 20–6 awg, 2-pin terminals. Follow the manual for mounting, grounding and cable connections. Connect the battery before the solar array as directed by the manual, then confirm the battery settings. Use the installation instructions for cable sizing, fusing and commissioning.
Download the Voyager 20A user manual, Voyager 20A specification sheet and Renogy limited warranty (A7). 2-year material and workmanship warranty, subject to Renogy terms.
Plan the rest of the system
solar charge controller sizing guide · MPPT versus PWM guide · Wanderer Li 30A PWM.
| Selected Product SKU | RCC20VOYP-G1-US |
|---|---|
| Manufacturer Model | RCC20VOYP |
| Charging Technology | PWM (pulse-width modulation), not MPPT |
| Battery System | 12V / 24V |
| Rated Charging Current | 20 A |
| Maximum PV Open-Circuit Voltage | 25 V Voc maximum on a 12 V bank; 55 V Voc maximum on a 24 V bank |
| PV Array Guidance | 260 W at 12 V; 520 W at 24 V |
| Battery Profiles | Sealed AGM, gel, flooded and compatible lithium; configure to battery manufacturer requirements |
| Lithium Setup | Manually select lithium system voltage and charging settings |
| Display | Backlit LCD showing charging current, battery voltage and error codes |
| Dedicated DC Load Output | No dedicated DC load terminals |
| USB Output | No USB output |
| Communication | No communication port; no BT-1 connection |
| Enclosure Rating | IP67 |
| Dimensions | 6.08 × 3.83 × 1.40 in |
| Weight | 0.55 lb |
| Terminals | 20–6 AWG, 2-pin terminals |
| Self-Consumption | 0.24 W at 12 V; 0.74 W at 24 V |
| Operating Temperature | -31°F to +113°F (-35°C to +45°C, converted) |
| Temperature Compensation | -3 mV/°C/2V for applicable non-lithium charging profiles |
| Included Components | 1 × Renogy Voyager 20A PWM Waterproof Solar Charge Controller |
| Connection Sequence | Battery first, then solar; follow exact-model installation manual |
| Warranty | 2-year material and workmanship warranty, subject to Renogy terms |
| Grounding Type | Common positive |
| Maximum Battery Voltage | 32 V |
| PV Range Qualification | Published 15–55 V range does not override the 25 V Voc ceiling on a 12 V battery bank |
| Optional Temperature Sensor | Renogy RTSVOY; 22 AWG, 10 ft per manufacturer listing |
| Storage Temperature | -31°F to +167°F (-35°C to +75°C, converted) |
| Humidity | 10–90%, non-condensing |
| Electronic Protections | Battery/controller over-temperature; PV/battery reverse polarity; over-voltage and over-current per manual |
| Selected variant SKU | RCC20VOYP-G1-US |
Product reference specifications
Specifications for the selected option are shown above. These product reference details describe the listing and its available configurations.
| Manufacturer Model | RCC20VOYP |
|---|---|
| Charging Technology | PWM (pulse-width modulation), not MPPT |
| Battery System | 12V / 24V |
| Rated Charging Current | 20 A |
| Maximum PV Open-Circuit Voltage | 25 V Voc maximum on a 12 V bank; 55 V Voc maximum on a 24 V bank |
| PV Array Guidance | 260 W at 12 V; 520 W at 24 V |
| Battery Profiles | Sealed AGM, gel, flooded and compatible lithium; configure to battery manufacturer requirements |
| Lithium Setup | Manually select lithium system voltage and charging settings |
| Display | Backlit LCD showing charging current, battery voltage and error codes |
| Dedicated DC Load Output | No dedicated DC load terminals |
| USB Output | No USB output |
| Communication | No communication port; no BT-1 connection |
| Enclosure Rating | IP67 |
| Dimensions | 6.08 × 3.83 × 1.40 in |
| Weight | 0.55 lb |
| Terminals | 20–6 AWG, 2-pin terminals |
| Self-Consumption | 0.24 W at 12 V; 0.74 W at 24 V |
| Operating Temperature | -31°F to +113°F (-35°C to +45°C, converted) |
| Temperature Compensation | -3 mV/°C/2V for applicable non-lithium charging profiles |
| Included Components | 1 × Renogy Voyager 20A PWM Waterproof Solar Charge Controller |
| Connection Sequence | Battery first, then solar; follow exact-model installation manual |
| Warranty | 2-year material and workmanship warranty, subject to Renogy terms |
| Grounding Type | Common positive |
| Maximum Battery Voltage | 32 V |
| PV Range Qualification | Published 15–55 V range does not override the 25 V Voc ceiling on a 12 V battery bank |
| Optional Temperature Sensor | Renogy RTSVOY; 22 AWG, 10 ft per manufacturer listing |
| Storage Temperature | -31°F to +167°F (-35°C to +75°C, converted) |
| Humidity | 10–90%, non-condensing |
| Electronic Protections | Battery/controller over-temperature; PV/battery reverse polarity; over-voltage and over-current per manual |
Frequently Asked Questions
Clear answers to common questions about this product, setup, compatibility, and use.


